ENERDRIVE 200AH OFF-GRID 40A AC & DC CHARGING BUNDLE, WITH 720W OF SOLAR PANELS AND 2000W INVERTER (AC TRANSFER)

505 X 173 X 265MM (BATTERY) | 295MM X 206MM X 90MM (AC BATTERY CHARGER) | 1482 X 680 X 35MM (SOLAR PANELS) | 230 X 435 X 115 MM (INVERTER)

Included: 

• Enerdrive ePOWER B-TEC 200Ah Lithium Battery EPL-200BT-12V-G2
• Enerdrive ePOWER 12V 40A DC to DC Battery Charger EN3DC40+
• Enerdrive ePOWER 12V 40A Battery Charger EN31240
• Enerdrive ePRO PLUS Battery Monitor EN55050
• Enerdrive ePOWER 2000W 12V Pure Sine Wave Inverter with RCD & AC Transfer Switch EN1120S-X
• Enerdrive 180W Mono Crystalline Fixed Solar Panel (x4) SP-EN180W

Specifications: 

• Amp Hours 200.0 Ah
• Battery Voltage 12V 
• Charger Mode Output Voltage 13.8V - 15.5V (DC Battery Charger) | 14.2 – 15.5 V (AC Battery Charger)
• Float 13.50 - 13.80V (Battery) | 13.0V - 13.8V (DC Battery Charger) | 13.4 – 13.8 V (AC Battery Charger)
• Equalize 15.5V (DC Battery Charger) | 16.0 V (AC Battery Charger)
• Charging Control Four stages (Bulk/Absorption/Float/Maintenance), Two stages (Bulk/Absorption)Constant Power Supply (Program setting), Priority Battery Bank Charging (AC Battery Charger
• DC Output Single (DC Battery Charger) | Three (1 fully independent, 2 common with diode isolation) (AC Battery Charger)
• Selectable Battery Type Gel, AGM, Flooded, Lithium, Program (DC and AC Battery Charger)
• Standby Current < 2 mA (AC Battery Charger)
• Cell Type Monocrystalline - 72 Cells each (Solar Panels)
• AC Input Voltage 90 to 265 VAC (AC Battery Charger)
• AC Input Operating Range 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max) (AC Battery Charger)
• AC Input Frequency Range 47 – 63 Hz (AC Battery Charger)
• Power Consumption 700W (Full Load) (AC Battery Charger)
• Power Factor Correction Yes (AC Battery Charger)
• Charger Efficiency 95% (DC Battery Charger) | > 82% (AC Battery Charger)
• Reverse Polarity Yes, (with user replaceable fuse/s) (AC Battery Charger)
• Over Charge Yes, unit shutdown (AC Battery Charger)
• Over Temperature Protection Yes, unit de-rated and shutdown (AC Battery Charger)
• Cooling Forced air ventilation (thermo controlled fan) (AC Battery Charger)
• Output Short Circuit Yes, (with user replaceable fuse/s) (AC Battery Charger)
• Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard) (DC Battery Charger) | Hot, Normal, Cold (no sensor connected) (AC Battery Charger)
• Battery Temperature Sensor Port RJ12 (standard battery temp. sensor supplied) (AC Battery Charger)
• LCD Display Charging status, Battery Voltage, Output Current & Fault Codes (AC Battery Charger)
• AC Input Connection IEC with Supplied 1.2M Power Lead (AC Battery Charger)
• DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (AC Battery Charger)
• DC Output Ground Single Heavy Duty Common Ground Stud (AC Battery Charger)
• Storage Temperature Range -40° to 70° C (AC Battery Charger)
• Operating Temperature Range -20° to 60° C (AC Battery Charger)
• Humidity 5-95%, relative humidity non-condensing (AC Battery Charger)
• Ingress Protection IP32 (Basic drip proof in vertical orientation) (AC Battery Charger)
• Nominal Voltage 12.8V (Battery)
• Nominal Capacity 200Ah (Battery)
• Total Charge Current Max 150A @ 25°C for 30mins (Battery)
• Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations
• Cycle Life (DOD - 80% under controlled conditions) ≥ 2000 Cycles (Battery)
• Battery Charge Temperature 0 ̴ 45°C (Battery)
• Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V (Battery)
• Standby (Float) Voltage 13.50 ̴ 13.80V (Battery)
• Maximum Charge Current 150A @ 25°C for 30mins (Battery)
• Recommended Charge Current for Maximum Life ≤ 60A (Battery)
• Battery Discharge Temperature -20 ̴ 60°C (Battery)
• Battery Output Voltage Range 11.00 ̴ 14.60V (Battery)
• Maximum Discharge Current 200A @ 25°C ± 5°C for 30mins (Battery)
• Pulse Discharge Current 450A for 1.0s (Battery)
• Discharge Cut-off Voltage ≤ 11.20V (Battery)
• Input Voltage 12.5 VDC (Inverter)
• AC Output 2000W, 8.7A (Inverter)
• No Load Battery Draw < 1.2 ADC (Inverter)
• Under Voltage Alarm 11.0/12.1 VDC (Inverter)
• Under Voltage Alarm Recovery 11.3/12.3 VDC
• Under Voltage Shutdown 10.5/11.8 VDC (Inverter)
• Under Voltage Shutdown Recovery 12.0/12.6 VDC (Inverter)
• Over Voltage Shutdown 15.5VDC (Inverter)
• USB Socket Output 5V, 750 mA (Inverter)
• Operating Altitude Up to 3000 meters above sea level (Inverter)
• Wattage 180W each (720W toal) (Solar Panels)
• Warranty 5 Years (Battery 5 Years)

Postage Time Frames: 

As each kit is custom built it may take us some time to process and dispatch your order. 

• 2 weeks estimated dispatch time
• Shipping can take 1-2 weeks depending on your location and postal service

If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.