Available in 12v 200Ah capacity, the Enerdrive B-TEC G2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. This power-horse comes with a 5 year warranty.
\n
Smart Phone Monitoring System
\n
The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium G2 = 320Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
The New Generation 2 B-TEC\n
\n
So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.
\n
\n\n
\n
Dimension
\n
Original
\n
Generation 2
\n
\n
\n
Length
\n
485mm
\n
505mm
\n
\n
\n
Width
\n
170mm
\n
172.5mm
\n
\n
\n
Height
\n
245mm
\n
265mm
\n
\n\n
\n
The increase in height allows for full 360° connection of the battery cables the make installation easier and more flexible. Also included for free is a metal battery tray and hold down strap to complete the installation process.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.
\n
The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 3 year full replacement warranty. Additionally, we have also included a further 2 year Pro-Rata warranty to giving you peace of mind knowing that Enerdrive have got you covered.
\n
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note; The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
\n
The G2 200Ah battery is able to accept a maximum inverter capacity of 2000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger than the Enerdrive B-TEC G2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
\n
\n
\n
Specifications
\n
\n
\n
Specifications
\n
\n
\n\n
\n
Normal Specification
\n
EPL-100BT-12V
\n
EPL-125BT-12V
\n
EPL-200BT-12V G2
\n
EPL-300BT-12V
\n
\n\n\n
\n
Nominal Voltage
\n
12.8V
\n
\n
\n
Nominal Capacity
\n
100Ah
\n
125Ah
\n
200Ah
\n
300Ah
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
≥ 2000 Cycles
\n
\n
\n
Standard Charge Specification (Lithium profile charger required)
\n
\n
\n
Battery Charge Temperature
\n
0 ̴ 45°C
\n
\n
\n
Normal Charge Voltage CV/CC*
\n
14.40 ̴ 14.60V
\n
\n
\n
Standby (Float) Voltage
\n
13.50 ̴ 13.80V
\n
\n
\n
Maximum Charge Current
\n
50A @ 25°C for 30mins
\n
60A @ 25°C for 30mins
\n
150A @ 25°C for 30mins
\n
150A @ 25°C for 30mins
\n
\n
\n
Recommended Charge Current for Maximum Life
\n
≤33A
\n
≤40A
\n
≤60A
\n
≤90A
\n
\n
\n
Standard Discharge Specification
\n
\n
\n
Battery Discharge Temperature
\n
-20 ̴ 60°C
\n
\n
\n
Battery Output Voltage Range
\n
11.00 ̴ 14.60V
\n
\n
\n
Maximum Discharge Current
\n
100A @ 25°C ± 5°C for 30mins
\n
100A @ 25°C ± 5°C for 30mins
\n
200A @ 25°C ±5°C for 30mins
\n
200A @ 25°C ±5°C for 30mins
\n
\n
\n
Pulse Discharge Current
\n
450A for 1.0s
\n
\n
\n
Discharge Cut-off Voltage
\n
≤11.20V
\n
\n
\n
Circuit Protection
\n
The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
\n
\n
\n
Over-Charge Protection
\n
\n
\n
Over-charge Protection Per Cell
\n
3.90V ± 0.03V
\n
\n
\n
Over-charge Release Per Cell
\n
3.60V ± 0.05V
\n
\n
\n
Over-charge Release Method
\n
Discharge below release voltage
\n
\n
\n
Over-Discharge Protection
\n
\n
\n
Over-discharge Protection Per Cell
\n
2.80V ± 0.05V
\n
\n
\n
Over-discharge Release Per Cell
\n
3.20V ± 0.05V
\n
\n
\n
Over-discharge Release Method
\n
Apply Charge/Voltage ≥12.8V
\n
\n
\n
Battery Manual Reset Button
\n
No
\n
No
\n
Yes
\n
No
\n
\n
\n
Over Current Protection
\n
\n
\n
Discharge Over Current
\n
110A for 30s – 450A for 1s
\n
110A for 30s – 450A for 1s
\n
220A for 30s – 450A for 1s
\n
220A for 30s – 450A for 1s
\n
\n
\n
Protection Reset Time
\n
5s Auto Release
\n
\n
\n
Over Current Release Method
\n
Disconnect Load
\n
\n
\n
Over Temperature Protection
\n
\n
\n
Battery Discharge Over Temperature
\n
Protection to 65°C ± 5°C
\n
\n
\n
\n
Release at 50°C ± 5°C
\n
\n
\n
Battery Charge Over Temperature
\n
Protection to 55°C ± 5°C
\n
\n
\n
\n
Release at 45°C ± 5°C
\n
\n
\n
Short Circuit Protection
\n
Auto release after 5s
\n
\n
\n
Mechanical Characteristics
\n
\n
\n
Dimensions
\n
Length 318mm
\n
505mm
\n
519mm
\n
\n
\n
\n
Width 165mm
\n
172.5mm
\n
273mm
\n
\n
\n
\n
Height 215mm
\n
265mm
\n
222mm
\n
\n
\n
Weight
\n
Approx 12.6 Kg
\n
Approx 15.0 Kg
\n
Approx 25.0 Kg
\n
Approx 37.7 Kg
\n
\n
\n
Storage Information
\n
\n
\n
Temperature & Humidity Range
\n
≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH
\n
\n
\n
\n
≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH
\n
\n
\n
Self-discharge Rate
\n
≤ 3% Per Month
\n
\n\n
\n
\n\n
Note: Specifications subject to change without notice.
\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from Shoptimized is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
As each kit is custom built it may take us some time to process and dispatch your order.
\n
\n
2 weeks estimateddispatch time
\n
Shipping can take 1-2 weeks depending on your location and postal service
\n
\n
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.
Invicta 12V 100Ah Slimline Front Terminal Lithium Battery With Bluetooth \n
\n
\n
Core Features:
\n
\n
7 Year Warranty
\n
Bluetooth app
\n
Front Terminals \n
\n
100ah LiFePo4
\n
\n
The Invicta Lithium 12V range has been specifically designed for the replacement of similar size Lead acid batteries. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications.
\n
Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities.
\n
Features:
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership.
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety.
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application.
\n
Fast recharge Battery is charged and ready to be used sooner.
\n
Flat Discharge Curve Longer run time & more efficient use of capacity.
\n
Extremely low self-discharge rate Can sit unused for longer periods of time.
\n
UL1642 at cell level.
\n
\n
\n
Bluetooth Capabilities:
\n
Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues.
\n
\n\n
\n
\n
Certification:
\n
Invicta is used in both camping and off-road applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations.
\n
Safety Notes:
\n
\n
Invicta batteries can be installed on either of its sides however not upside down
\n
Invicta batteries are not for under bonnet use
\n
Invicta batteries are not for starting applications
\n
Invicta batteries must use a charger with a lithium profile setting
\n
When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery
\n
\n
\n\n
\n
\n
Specifications
\n
\n
\n\n
\n
Short Description
\n
Invicta 12V 100Ah Front Terminal Lithium Battery with Bluetooth, 7 Year Warranty
\n
\n
\n
SKU
\n
SNLFT12V100BT
\n
\n
\n
GTIN (Global Trade Item Number)
\n
721802213381
\n
\n
\n
Brands
\n
Invicta
\n
\n
\n
Amp Hours (Ah)
\n
100.0 Ah
\n
\n
\n
Battery Voltage
\n
12V
\n
\n
\n
Standby Current
\n
13.8V
\n
\n
\n
Operating Range (temp)
\n
Charge (0-50), Discharge (-20 - 55)
\n
\n
\n
Nominal Voltage
\n
12.8v
\n
\n
\n
Nominal Capacity
\n
100Ah
\n
\n
\n
Total Charge Current
\n
60A
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
>2000
\n
\n
\n
Maximum Charge Current
\n
60A
\n
\n
\n
Recommended Charge Current for Maximum Life
\n
<50A
\n
\n
\n
Maximum Discharge Current
\n
95A
\n
\n
\n
Pulse Discharge Current
\n
250A
\n
\n
\n
Charge Cut-off Voltage
\n
10V
\n
\n
\n
Dimensions
\n
551 x 109 x 239 mm (L x W x H)
\n
\n
\n
Certification
\n
IEC 62619 & IEC 62133
\n
\n
\n
Net Weight (kg)
\n
12.4 Kg
\n
\n
\n
Manufacturers Warranty
\n
7 Years - Please see Warranty Tab for full Terms & Conditions
\n
\n\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from us is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
\n
Metro3 – 5 Business Days
\n
Regional5 – 10 Business Days
\n
Remote10 – 14 Business Days
\n
\n
Important COVID-19 Notes:
\n
Currently some of our suppliers are experiencing shipment delays for new stock arriving into the country. We are commited to keeping our customers as informed as possible, however the stock arrival updates can change quickly - please know that the info we are providing is the most recent we have. Warehouses and freight companies are also experiencing challenges, so please allow additional days for dispatch and delivery over and above the normal estimates outlined below.
Invicta 12V 100Ah Slimline Front Terminal Lithium Battery With Bluetooth \n
\n
\n
Core Features:
\n
\n
7 Year Warranty
\n
Bluetooth app
\n
Front Terminals \n
\n
100ah LiFePo4
\n
\n
The Invicta Lithium 12V range has been specifically designed for the replacement of similar size Lead acid batteries. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications.
\n
Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities.
\n
Features:
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership.
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety.
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application.
\n
Fast recharge Battery is charged and ready to be used sooner.
\n
Flat Discharge Curve Longer run time & more efficient use of capacity.
\n
Extremely low self-discharge rate Can sit unused for longer periods of time.
\n
UL1642 at cell level.
\n
\n
\n
Bluetooth Capabilities:
\n
Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues.
\n
\n\n
\n
\n
Certification:
\n
Invicta is used in both camping and off-road applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations.
\n
Safety Notes:
\n
\n
Invicta batteries can be installed on either of its sides however not upside down
\n
Invicta batteries are not for under bonnet use
\n
Invicta batteries are not for starting applications
\n
Invicta batteries must use a charger with a lithium profile setting
\n
When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery
\n
\n
\n\n
\n
\n
Specifications
\n
\n
\n\n
\n
Short Description
\n
Invicta 12V 100Ah Front Terminal Lithium Battery with Bluetooth, 7 Year Warranty
\n
\n
\n
SKU
\n
SNLFT12V100BT
\n
\n
\n
GTIN (Global Trade Item Number)
\n
721802213381
\n
\n
\n
Brands
\n
Invicta
\n
\n
\n
Amp Hours (Ah)
\n
100.0 Ah
\n
\n
\n
Battery Voltage
\n
12V
\n
\n
\n
Standby Current
\n
13.8V
\n
\n
\n
Operating Range (temp)
\n
Charge (0-50), Discharge (-20 - 55)
\n
\n
\n
Nominal Voltage
\n
12.8v
\n
\n
\n
Nominal Capacity
\n
100Ah
\n
\n
\n
Total Charge Current
\n
60A
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
>2000
\n
\n
\n
Maximum Charge Current
\n
60A
\n
\n
\n
Recommended Charge Current for Maximum Life
\n
<50A
\n
\n
\n
Maximum Discharge Current
\n
95A
\n
\n
\n
Pulse Discharge Current
\n
250A
\n
\n
\n
Charge Cut-off Voltage
\n
10V
\n
\n
\n
Dimensions
\n
551 x 109 x 239 mm (L x W x H)
\n
\n
\n
Certification
\n
IEC 62619 & IEC 62133
\n
\n
\n
Net Weight (kg)
\n
12.4 Kg
\n
\n
\n
Manufacturers Warranty
\n
7 Years - Please see Warranty Tab for full Terms & Conditions
\n
\n\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from us is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
\n
Metro3 – 5 Business Days
\n
Regional5 – 10 Business Days
\n
Remote10 – 14 Business Days
\n
\n
Important COVID-19 Notes:
\n
Currently some of our suppliers are experiencing shipment delays for new stock arriving into the country. We are commited to keeping our customers as informed as possible, however the stock arrival updates can change quickly - please know that the info we are providing is the most recent we have. Warehouses and freight companies are also experiencing challenges, so please allow additional days for dispatch and delivery over and above the normal estimates outlined below.
\n
\n
"},{"id":1932234719274,"title":"INVICTA 100AH LITHIUM BATTERY 12V - 7 Year Warranty","handle":"bmpro-12v-100ah-sentry-battery-lithium-deep-cycle-battery","description":"
Invicta Battery SNL12V100S
\n
ABOUT INVICTA LITHIUM
\n
Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances.
\n
As well as utilising LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery.As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilisation of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications.
\n
Feature & Benefits
\n
\n
IEC Certification on the combination of BMS and individual cell for complete safety peace of mind
\n
High energy density (less than half the weight of SLA) lowering total weight of application
\n
Fast recharge, battery is charged and ready to be used sooner
\n
Flat discharge curve, longer run time and more efficient use of capacity
\n
Extremely low self-discharge rate, can sit unused for longer periods of time
\n
Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against overcharge/discharge, temperature and short circuit providing the highest degree of safety.
\n
Greater capacity utilisation 60% more than SLA, gives longer runtime than equivalent SLA
\n
\n
SPECIFICATIONS
\n
Nominal Voltage12.8V Nominal Capacity (25℃, 0.33C)100Ah Terminal M8 Length (mm)306 ± 2 Width (mm)168 ± 2 Height (mm)215 ± 2 Weight12.2 kg Max Charge Voltage14.6 ± 0.1V Standby13.8 ± 0.1V Cut off Voltage10V Max. Discharge Current (30 mins)100A Max. Pulse Discharge Current (3 Sec)350A Max. Charge Current100A Recommended Current Charge ≤60A Cycle Life (100% DoD)≥ 2000 Operating Temp – Charge0 — 50°C Operating Temp – Discharge-20 – 60°C Short Circuit Release30 sec Max. Series / Parallel Configuration4P or 4S
","published_at":"2019-04-12T12:49:42+10:00","created_at":"2019-04-12T12:56:55+10:00","vendor":"Invicta","type":"Lithium Battery","tags":["nambour2022"],"price":105000,"price_min":105000,"price_max":105000,"available":true,"price_varies":false,"compare_at_price":159900,"compare_at_price_min":159900,"compare_at_price_max":159900,"compare_at_price_varies":false,"variants":[{"id":14764861358122,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNL12V100S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"INVICTA 100AH LITHIUM BATTERY 12V - 7 Year Warranty","public_title":null,"options":["Default Title"],"price":105000,"weight":15000,"compare_at_price":159900,"inventory_quantity":-3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"0721802213237","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/accelerate-auto-electrics-air-conditioning-battery-12v-100ah-invicta-battery-lithium-deep-cycle-battery-15902669668394.png?v=1612786457"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-auto-electrics-air-conditioning-battery-12v-100ah-invicta-battery-lithium-deep-cycle-battery-15902669668394.png?v=1612786457","options":["Title"],"media":[{"alt":"Accelerate Auto Electrics & Air Conditioning Battery 12V 100AH INVICTA BATTERY Lithium Deep Cycle Battery","id":8252948676650,"position":1,"preview_image":{"aspect_ratio":1,"height":600,"width":600,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-auto-electrics-air-conditioning-battery-12v-100ah-invicta-battery-lithium-deep-cycle-battery-15902669668394.png?v=1612786457"},"aspect_ratio":1,"height":600,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-auto-electrics-air-conditioning-battery-12v-100ah-invicta-battery-lithium-deep-cycle-battery-15902669668394.png?v=1612786457","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
Invicta Battery SNL12V100S
\n
ABOUT INVICTA LITHIUM
\n
Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances.
\n
As well as utilising LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery.As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilisation of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications.
\n
Feature & Benefits
\n
\n
IEC Certification on the combination of BMS and individual cell for complete safety peace of mind
\n
High energy density (less than half the weight of SLA) lowering total weight of application
\n
Fast recharge, battery is charged and ready to be used sooner
\n
Flat discharge curve, longer run time and more efficient use of capacity
\n
Extremely low self-discharge rate, can sit unused for longer periods of time
\n
Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against overcharge/discharge, temperature and short circuit providing the highest degree of safety.
\n
Greater capacity utilisation 60% more than SLA, gives longer runtime than equivalent SLA
\n
\n
SPECIFICATIONS
\n
Nominal Voltage12.8V Nominal Capacity (25℃, 0.33C)100Ah Terminal M8 Length (mm)306 ± 2 Width (mm)168 ± 2 Height (mm)215 ± 2 Weight12.2 kg Max Charge Voltage14.6 ± 0.1V Standby13.8 ± 0.1V Cut off Voltage10V Max. Discharge Current (30 mins)100A Max. Pulse Discharge Current (3 Sec)350A Max. Charge Current100A Recommended Current Charge ≤60A Cycle Life (100% DoD)≥ 2000 Operating Temp – Charge0 — 50°C Operating Temp – Discharge-20 – 60°C Short Circuit Release30 sec Max. Series / Parallel Configuration4P or 4S
Currently on back order - Purchased batteries will be shipped after the 30th of October 2024
\n
The Invicta Xero 12V range has been specifically designed for replacement of similar size Lead acid batteries. The Xero range uses all the benefits of Lithium Iron Phosphate (LiFePO4) technology and pushes the limits in communication possibilities, power, safety and security with its advanced battery technology.
\n
Features & Benefits
\n
\n
Large number of cycles >3000 (100% DoD) Up to 10 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
More communication possibilites with Bluetooth and open CAN bus, this makes connecting devices even easier.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Detachable mounting feet
\n
Secure your battery to the application with detachable mounting feet. Simply remove/attach with a screw driver.
\n
Sealed from the Australian elements IP67 rated
\n
More power and customisation with the ability to connect 4 in series, or 16 in parallel, or up to 4 in series and 4 in parallel. Max discharge
Currently on back order - Purchased batteries will be shipped after the 30th of October 2024
\n
The Invicta Xero 12V range has been specifically designed for replacement of similar size Lead acid batteries. The Xero range uses all the benefits of Lithium Iron Phosphate (LiFePO4) technology and pushes the limits in communication possibilities, power, safety and security with its advanced battery technology.
\n
Features & Benefits
\n
\n
Large number of cycles >3000 (100% DoD) Up to 10 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
More communication possibilites with Bluetooth and open CAN bus, this makes connecting devices even easier.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Detachable mounting feet
\n
Secure your battery to the application with detachable mounting feet. Simply remove/attach with a screw driver.
\n
Sealed from the Australian elements IP67 rated
\n
More power and customisation with the ability to connect 4 in series, or 16 in parallel, or up to 4 in series and 4 in parallel. Max discharge
Are you ready for portable power unleashed? REDARC's GoBlock is not your average 12v battery box, it is a rugged and sophisticated portable dual battery system capable of powering your next great adventure.
\n
Hit the road and head to the great outdoors or enjoy a family day out with the peace of mind that no matter what, you will be packed with hours, even days of off-grid power.
\n
GoBlock® features 9 products in 1 compact unit plus 2 accessories in the box (12v accessory socket charger + mains AC wall charger) and over the air updates.
\n
Features & Benefits
\n
\n
\nAC charger (overnight mains charger) \n
\n
\n50A DC-DC Charger \n
\n
\n50A MPPT Solar regulator\n
\n
\nQuality LiFePO4 battery cells \n
\n
\nREDARC proprietary battery management system \n
\n
\nBattery monitoring via RedVision® \n
\n
\nStart Battery Recovery capability, \n
\n
Aluminium Battery Housing
\n
\nCharging outlets for 12v accessory, Anderson and USB\n
\n
\n
Portable power unleashed
\n
Go beyond campgrounds and caravan parks with this unique lithium battery box that is capable of delivering fast and effective charge to run fridges, camp lights, drones, cameras and CPAP machines.
\n
This complete system features REDARC’s market leading DC DC charging technology that makes it capable of a rapid 50A recharge rate, meaning in around two hours you could have a massive 100Ah of power.
\n
This system is built tough for the most rugged and distant off-grid adventure, yet suitable for practically any vehicle, from cars and vans to 4WDs. It’s also ideal for vehicles that do not have enough room under the hood to install a traditional dual battery system, and can be paired with asolar panelto provide endless power.
\n
Go tough
\n
GoBlock is built tough with a rugged exterior, prepared for almost any situation.
\n
With an IP52 protection rating, its inputs and outputs are neatly recessed with tough shields to protect them from hard knocks and inclement weather.
\n
The battery is made of high-quality lithium iron phosphate (LiFePO4) cells, safely enclosed within the robust, fully sealed aluminium case. It is powerful with a longer lifetime and the cells deliver virtually full power until discharged.
\n
\n
Go safe
\n
GoBlock includes a Start Battery Recovery feature, when paired with theSmart Battery Recovery Cable, which enables you to safely charge a vehicle’s start battery, so you can get yourself or a friend out of trouble and on the road in just 15 minutes with this unique vehicle battery recovery capability.
\n
Go wireless
\n
GoBlock connects via Bluetooth to REDARC’s RedVision smartphone App (iOS + Android) giving you remote access to the battery state of charge, system diagnostics and input source information, and the ability to activate the Start Battery Recovery mode.
\n\n
Go in any vehicle
\n
GoBlock can be installed into vehicles with either standard or smart alternator systems, making it suitable for any vehicle installation**, while not being a permanently mounted dual battery system means you can move it between multiple vehicles offering greater value for money.
\n
\n
The GoBlock includes
\n
• 7.5A AC overnight mains charger
\n
• 7.5A DC Accessory socket charger
\n
• Access to the iOS and Android App
\n
Optional accessories
\n
• 50A PowerDock with wiring kit
\n
• Start Battery Recovery cables
\n
• PowerDock a quick charger for your GoBlock
\n
Say goodbye to the homemade battery box and unleash portable power with GoBlock from REDARC.
Are you ready for portable power unleashed? REDARC's GoBlock is not your average 12v battery box, it is a rugged and sophisticated portable dual battery system capable of powering your next great adventure.
\n
Hit the road and head to the great outdoors or enjoy a family day out with the peace of mind that no matter what, you will be packed with hours, even days of off-grid power.
\n
GoBlock® features 9 products in 1 compact unit plus 2 accessories in the box (12v accessory socket charger + mains AC wall charger) and over the air updates.
\n
Features & Benefits
\n
\n
\nAC charger (overnight mains charger) \n
\n
\n50A DC-DC Charger \n
\n
\n50A MPPT Solar regulator\n
\n
\nQuality LiFePO4 battery cells \n
\n
\nREDARC proprietary battery management system \n
\n
\nBattery monitoring via RedVision® \n
\n
\nStart Battery Recovery capability, \n
\n
Aluminium Battery Housing
\n
\nCharging outlets for 12v accessory, Anderson and USB\n
\n
\n
Portable power unleashed
\n
Go beyond campgrounds and caravan parks with this unique lithium battery box that is capable of delivering fast and effective charge to run fridges, camp lights, drones, cameras and CPAP machines.
\n
This complete system features REDARC’s market leading DC DC charging technology that makes it capable of a rapid 50A recharge rate, meaning in around two hours you could have a massive 100Ah of power.
\n
This system is built tough for the most rugged and distant off-grid adventure, yet suitable for practically any vehicle, from cars and vans to 4WDs. It’s also ideal for vehicles that do not have enough room under the hood to install a traditional dual battery system, and can be paired with asolar panelto provide endless power.
\n
Go tough
\n
GoBlock is built tough with a rugged exterior, prepared for almost any situation.
\n
With an IP52 protection rating, its inputs and outputs are neatly recessed with tough shields to protect them from hard knocks and inclement weather.
\n
The battery is made of high-quality lithium iron phosphate (LiFePO4) cells, safely enclosed within the robust, fully sealed aluminium case. It is powerful with a longer lifetime and the cells deliver virtually full power until discharged.
\n
\n
Go safe
\n
GoBlock includes a Start Battery Recovery feature, when paired with theSmart Battery Recovery Cable, which enables you to safely charge a vehicle’s start battery, so you can get yourself or a friend out of trouble and on the road in just 15 minutes with this unique vehicle battery recovery capability.
\n
Go wireless
\n
GoBlock connects via Bluetooth to REDARC’s RedVision smartphone App (iOS + Android) giving you remote access to the battery state of charge, system diagnostics and input source information, and the ability to activate the Start Battery Recovery mode.
\n\n
Go in any vehicle
\n
GoBlock can be installed into vehicles with either standard or smart alternator systems, making it suitable for any vehicle installation**, while not being a permanently mounted dual battery system means you can move it between multiple vehicles offering greater value for money.
\n
\n
The GoBlock includes
\n
• 7.5A AC overnight mains charger
\n
• 7.5A DC Accessory socket charger
\n
• Access to the iOS and Android App
\n
Optional accessories
\n
• 50A PowerDock with wiring kit
\n
• Start Battery Recovery cables
\n
• PowerDock a quick charger for your GoBlock
\n
Say goodbye to the homemade battery box and unleash portable power with GoBlock from REDARC.
Enerdrive ePOWER B-TEC 100Ah Slim Lithium Battery, 5 Year Warranty.
\n\n
Enerdrive B-Tec 100AH Slim Battery is an ideal solution for those who are limited for space. It can be well positioned behind the back seat of most dual cab utes or narrow spaces in other locations. The limited edition B-Tec 100Ah Slim Lithium has the same DNA boasts as all other Enerdrive B-Tec batteries. With high quality prismatic cells and suitable for up to 1000 Watt inverter with the best aftersales support program in Australia. \n
\n
\n
The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
\n
\n
\n
\n\n
\n
Short Description
\n
\n
Enerdrive ePOWER B-TEC 100Ah Slim Lithium Battery, 5 Year Warranty
\n
\n
\n
\n
SKU
\n
EPL-100BT-12V-SLIM
\n
\n
\n
GTIN (Global Trade Item Number)
\n
9342616001028
\n
\n
\n
Brands
\n
Enerdrive
\n
\n
\n
Product Category
\n
Batteries
\n
\n
\n
Amp Hours (Ah)
\n
100.0 Ah
\n
\n
\n
Battery Voltage
\n
12V
\n
\n
\n
Cell Type
\n
LiFePO4 Prismatic Cell, 4P x 4S (3.2V per Cell)
\n
\n
\n
Nominal Voltage
\n
12.8V
\n
\n
\n
Nominal Capacity
\n
100Ah
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
≥ 2000 Cycles
\n
\n
\n
Battery Charge Temperature
\n
0 ̴ 45°C
\n
\n
\n
Normal Charge Voltage CV/CC*
\n
14.40 ̴ 14.60V
\n
\n
\n
Standby (Float) Voltage
\n
13.50 ̴ 13.80V
\n
\n
\n
Maximum Charge Current
\n
80A @ 25°C for 30mins
\n
\n
\n
Battery Discharge Temperature
\n
-20 ̴ 60°C
\n
\n
\n
Dimensions
\n
551 x 101 x 239 mm (L x W x H)
\n
\n
\n
Net Weight (kg)
\n
12.4 Kg
\n
\n
\n
Manufacturers Warranty
\n
5 Years
\n
\n\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from us is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
As each kit is custom built it may take us some time to process and dispatch your order.
\n
\n
2 weeks estimateddispatch time
\n
Shipping can take 1-2 weeks depending on your location and postal service
\n
\n
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.
Enerdrive ePOWER B-TEC 100Ah Slim Lithium Battery, 5 Year Warranty.
\n\n
Enerdrive B-Tec 100AH Slim Battery is an ideal solution for those who are limited for space. It can be well positioned behind the back seat of most dual cab utes or narrow spaces in other locations. The limited edition B-Tec 100Ah Slim Lithium has the same DNA boasts as all other Enerdrive B-Tec batteries. With high quality prismatic cells and suitable for up to 1000 Watt inverter with the best aftersales support program in Australia. \n
\n
\n
The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
\n
\n
\n
\n\n
\n
Short Description
\n
\n
Enerdrive ePOWER B-TEC 100Ah Slim Lithium Battery, 5 Year Warranty
\n
\n
\n
\n
SKU
\n
EPL-100BT-12V-SLIM
\n
\n
\n
GTIN (Global Trade Item Number)
\n
9342616001028
\n
\n
\n
Brands
\n
Enerdrive
\n
\n
\n
Product Category
\n
Batteries
\n
\n
\n
Amp Hours (Ah)
\n
100.0 Ah
\n
\n
\n
Battery Voltage
\n
12V
\n
\n
\n
Cell Type
\n
LiFePO4 Prismatic Cell, 4P x 4S (3.2V per Cell)
\n
\n
\n
Nominal Voltage
\n
12.8V
\n
\n
\n
Nominal Capacity
\n
100Ah
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
≥ 2000 Cycles
\n
\n
\n
Battery Charge Temperature
\n
0 ̴ 45°C
\n
\n
\n
Normal Charge Voltage CV/CC*
\n
14.40 ̴ 14.60V
\n
\n
\n
Standby (Float) Voltage
\n
13.50 ̴ 13.80V
\n
\n
\n
Maximum Charge Current
\n
80A @ 25°C for 30mins
\n
\n
\n
Battery Discharge Temperature
\n
-20 ̴ 60°C
\n
\n
\n
Dimensions
\n
551 x 101 x 239 mm (L x W x H)
\n
\n
\n
Net Weight (kg)
\n
12.4 Kg
\n
\n
\n
Manufacturers Warranty
\n
5 Years
\n
\n\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from us is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
As each kit is custom built it may take us some time to process and dispatch your order.
\n
\n
2 weeks estimateddispatch time
\n
Shipping can take 1-2 weeks depending on your location and postal service
\n
\n
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.
Available in 12v 300Ah capacity, the EnerdriveB-TECG2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The EnerdriveB-TECG2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium G2 = 320Ah AGM
\n
300Ah Lithium G2 = 480Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The EnerdriveB-TECG2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The EnerdriveB-TECG2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
The New Generation 2B-TEC\n
\n
So, How does the New Enerdrive Generation 2 (G2)B-TEC200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.
\n
\n\n
\n
Dimension
\n
Original
\n
Generation 2
\n
\n
\n
Length
\n
519mm
\n
521mm
\n
\n
\n
Width
\n
273mm
\n
280mm
\n
\n
\n
\n
Height
\n
\n
222mm
\n
253mm
\n
\n
\n
Weight Approx.
\n
-
\n
38.2Kgs
\n
\n\n
\n
Also included for free is a metal battery tray and hold down strap to complete the installation process.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.
\n
The New Enerdrive Generation 2 (G2)B-TEC300Ah Lithium Battery now comes with a 5 year warranty, giving you peace of mind that this product will keep you covered.
\n
With over 8 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 4000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note;The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
\n
The G2 300Ah battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger thanthe EnerdriveB-TECG2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
Please note B-TEC batteries must not be installed – • In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual. • In wet areas such as caravan chassis mounts, open ute trays or boat deck areas. • Inside compartments dedicated to carrying gas.
\n
This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.
Available in 12v 300Ah capacity, the EnerdriveB-TECG2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The EnerdriveB-TECG2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium G2 = 320Ah AGM
\n
300Ah Lithium G2 = 480Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The EnerdriveB-TECG2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The EnerdriveB-TECG2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
The New Generation 2B-TEC\n
\n
So, How does the New Enerdrive Generation 2 (G2)B-TEC200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.
\n
\n\n
\n
Dimension
\n
Original
\n
Generation 2
\n
\n
\n
Length
\n
519mm
\n
521mm
\n
\n
\n
Width
\n
273mm
\n
280mm
\n
\n
\n
\n
Height
\n
\n
222mm
\n
253mm
\n
\n
\n
Weight Approx.
\n
-
\n
38.2Kgs
\n
\n\n
\n
Also included for free is a metal battery tray and hold down strap to complete the installation process.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.
\n
The New Enerdrive Generation 2 (G2)B-TEC300Ah Lithium Battery now comes with a 5 year warranty, giving you peace of mind that this product will keep you covered.
\n
With over 8 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 4000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note;The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
\n
The G2 300Ah battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger thanthe EnerdriveB-TECG2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
Please note B-TEC batteries must not be installed – • In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual. • In wet areas such as caravan chassis mounts, open ute trays or boat deck areas. • Inside compartments dedicated to carrying gas.
\n
This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.
"},{"id":6941118857258,"title":"Redarc GoBlock Fast Charger PowerDock","handle":"redarc-goblock-fast-charger-powerdock","description":"
The PowerDock can deliver fast charge and safely secure your system. To get the most out of your GoBlock portable power system, add the PowerDock, a semi-permanent installation that allows you to securely mount your system and rapid charge from the vehicle.This PowerDock can provide a rapid charge direct into the GoBlock system making it the most versatile portable dual battery system and a true all-in-one solution.
\n
The PowerDock allows Green Power Priority charging to your GoBlock setup, providing simultaneous vehicle and solar charging that will utilise all available solar power before supplementing with power from the vehicle when necessary. This reduces the load on your vehicle electrical system and ultimately increases fuel economy.
\n
Features
\n
\n
Simple to install, quick-release system
\n
Simultaneous DC and fixed solar charging with Green Power Priority
\n
Automatic safe chargeback to the start battery
\n
GoBlock restraint for safe travel
\n
Lockable
\n
Ignition signal input for better performance when used with smart alternators
\n
\n
Specifications
\n
\n\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n
\n
DIMENSIONS OPEN
\n
346 × 230 × 607 mm / 13.6\" × 9.1\" × 23.9\"
\n
\n
\n
DIMENSIONS CLOSED
\n
110 × 230 × 487 mm / 4.3\" × 9.1\" × 19.2\"
\n
\n\n
","published_at":"2023-08-31T08:29:17+10:00","created_at":"2023-08-02T16:29:48+10:00","vendor":"Redarc","type":"Lithium Battery","tags":["Lithium Battery","Redarc"],"price":51000,"price_min":51000,"price_max":51000,"available":true,"price_varies":false,"compare_at_price":52900,"compare_at_price_min":52900,"compare_at_price_max":52900,"compare_at_price_varies":false,"variants":[{"id":40565660811306,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PPSDOCK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Redarc GoBlock Fast Charger PowerDock","public_title":null,"options":["Default Title"],"price":51000,"weight":6000,"compare_at_price":52900,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"9338628006656","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_87.svg?v=1690958067","//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_88.svg?v=1690958152"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_87.svg?v=1690958067","options":["Title"],"media":[{"alt":null,"id":23048404336682,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_87.svg?v=1690958067"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_87.svg?v=1690958067","width":940},{"alt":null,"id":23048404434986,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_88.svg?v=1690958152"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_88.svg?v=1690958152","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
The PowerDock can deliver fast charge and safely secure your system. To get the most out of your GoBlock portable power system, add the PowerDock, a semi-permanent installation that allows you to securely mount your system and rapid charge from the vehicle.This PowerDock can provide a rapid charge direct into the GoBlock system making it the most versatile portable dual battery system and a true all-in-one solution.
\n
The PowerDock allows Green Power Priority charging to your GoBlock setup, providing simultaneous vehicle and solar charging that will utilise all available solar power before supplementing with power from the vehicle when necessary. This reduces the load on your vehicle electrical system and ultimately increases fuel economy.
\n
Features
\n
\n
Simple to install, quick-release system
\n
Simultaneous DC and fixed solar charging with Green Power Priority
\n
Automatic safe chargeback to the start battery
\n
GoBlock restraint for safe travel
\n
Lockable
\n
Ignition signal input for better performance when used with smart alternators
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
\n
Features & Benefits
\n
\n
\nAustralian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.\n
\n
\n
\n
\nDual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\nPouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\nCharge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\nHeat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\nJump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.\n
\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
\n
Features & Benefits
\n
\n
\nAustralian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.\n
\n
\n
\n
\nDual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\nPouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\nCharge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\nHeat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\nJump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.\n
\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
\n\n\n"},{"id":6701224198186,"title":"Invicta Hybrid Lithium Extreme 80Ah Max SNLHMAX","handle":"invicta-hybrid-lithium-extreme-max-r-12v-80ah","description":"
\n
\n
\n
\n
\n
\n
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
Features & Benefits
\n
\n
\n
Australian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.
\n
\n
\n
Dual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\n
Pouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\n
Charge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\n
Heat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\n
Jump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.
\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
","published_at":"2021-12-07T16:24:14+10:00","created_at":"2021-12-07T16:21:09+10:00","vendor":"Invicta","type":"Lithium Battery","tags":["Battery","Dual Battery System","Lithium Battery","nambour2024"],"price":199900,"price_min":199900,"price_max":199900,"available":true,"price_varies":false,"compare_at_price":219900,"compare_at_price_min":219900,"compare_at_price_max":219900,"compare_at_price_varies":false,"variants":[{"id":39700660158506,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNLHMAX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Invicta Hybrid Lithium Extreme 80Ah Max SNLHMAX","public_title":null,"options":["Default Title"],"price":199900,"weight":10300,"compare_at_price":219900,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":"721802213671","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-r-12v-80ah-28832585121834.png?v=1638858374","//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-80ah-12v-28835238576170.png?v=1638922454"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-r-12v-80ah-28832585121834.png?v=1638858374","options":["Title"],"media":[{"alt":"Invicta Lithium Battery Invicta Hybrid Lithium Extreme Max R 12V 80Ah","id":21238088204330,"position":1,"preview_image":{"aspect_ratio":1.148,"height":1394,"width":1600,"src":"//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-r-12v-80ah-28832585121834.png?v=1638858374"},"aspect_ratio":1.148,"height":1394,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-r-12v-80ah-28832585121834.png?v=1638858374","width":1600},{"alt":"Invicta Lithium Battery Invicta Hybrid Lithium Extreme Max 80Ah 12V","id":21240796184618,"position":2,"preview_image":{"aspect_ratio":8.471,"height":136,"width":1152,"src":"//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-80ah-12v-28835238576170.png?v=1638922454"},"aspect_ratio":8.471,"height":136,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/invicta-lithium-battery-invicta-hybrid-lithium-extreme-max-80ah-12v-28835238576170.png?v=1638922454","width":1152}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
\n
\n
\n
\n
\n
\n
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
Features & Benefits
\n
\n
\n
Australian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.
\n
\n
\n
Dual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\n
Pouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\n
Charge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\n
Heat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\n
Jump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.
\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
"},{"id":7180337381418,"title":"Invicta Super Slim 12V 100Ah LiFePO4 Battery Bluetooth","handle":"invicta-super-slim-12v-100ah-lifepo4-battery-bluetooth","description":"
Super Slim And Robust Design
\n
The Invicta Super Slim lithium battery has been designed to be the slimmest battery ever from Invicta. As vehicle manufacturers continue to push internal design limits on their vehicles, the traditional lithium battery is becoming harder and harder to fit in increasingly reduced available space.
\n
The Invicta Super Slim lithium battery was designed to combat this issue by using a 65mm wide frame, perfect for slipping behind the back seat or anywhere that might be a tight space. Its metal case also ensures it can handle any knocks or bumps when squeezed in a tight space. And all this without sacrificing any performance thanks to its prismatic cell construction.
\n
High-Performance Capabilities
\n
Don’t let its size fool you, the Invicta Super Slim range still has all the performance you will need when going on your next adventure. This includes integrated BMS with protections, high-discharge rate with over-rated Anderson plugs, Bluetooth monitoring, 1800W or 3000W inverter compatibility, and all backed by a 5-year full replacement warranty.
\n
Bluetooth Monitoring
\n
Sharing the same Bluetooth monitoring platform as our Invicta Hybrid Starter range, you can be sure you are getting the most accurate data available. Easy to download and free for all Invicta customers, simply follow the link below for most Android and Apple smart devices. Easily monitor current, voltage, status, cycles and capacity in one space.
The Invicta Super Slim lithium battery has been designed to be the slimmest battery ever from Invicta. As vehicle manufacturers continue to push internal design limits on their vehicles, the traditional lithium battery is becoming harder and harder to fit in increasingly reduced available space.
\n
The Invicta Super Slim lithium battery was designed to combat this issue by using a 65mm wide frame, perfect for slipping behind the back seat or anywhere that might be a tight space. Its metal case also ensures it can handle any knocks or bumps when squeezed in a tight space. And all this without sacrificing any performance thanks to its prismatic cell construction.
\n
High-Performance Capabilities
\n
Don’t let its size fool you, the Invicta Super Slim range still has all the performance you will need when going on your next adventure. This includes integrated BMS with protections, high-discharge rate with over-rated Anderson plugs, Bluetooth monitoring, 1800W or 3000W inverter compatibility, and all backed by a 5-year full replacement warranty.
\n
Bluetooth Monitoring
\n
Sharing the same Bluetooth monitoring platform as our Invicta Hybrid Starter range, you can be sure you are getting the most accurate data available. Easy to download and free for all Invicta customers, simply follow the link below for most Android and Apple smart devices. Easily monitor current, voltage, status, cycles and capacity in one space.
"},{"id":6941018751018,"title":"INVICTA 100AH BLUETOOTH LITHIUM BATTERY 12V - 7 Year Warranty","handle":"invicta-100ah-bluetooth-lithium-battery-12v-7-year-warranty","description":"
Invicta Battery SNL12V100BT
\n
ABOUT INVICTA LITHIUM
\n
The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications.
\n
The Bluetooth feature is available on any battery in the Invicta range that ends in BT. It allows the user to conveniently monitor critical information about the battery, which includes charge, discharge, capacity, temperature, voltage and BMS safety features. All via a free application which can be downloaded on any Apple or Android device. This can be especially useful as conventional testing can be difficult and inaccurate. It can also help if the battery has been placed in a hard to reach spot, like behind the seat or battery box, as monitoring can be achieved from 5 meters away. The Invicta Bluetooth cannot be put in series, and for this reason, we have made available a 24V and 36V option to ensure you have access to a solution that will be suitable.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
FEATURES & BENEFITS
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA • High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Fast recharge Battery is charged and ready to be used sooner • Flat Discharge Curve Longer run time & more efficient use of capacity
\n
Extremely low self-discharge rate Can sit unused for longer periods of time
\n
UL1642 at cell level • IEC Certified
\n
\n Bluetooth monitoring via a free mobile application allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System. The Bluetooth capabilities can also be used to help troubleshoot system issues.\n
\n
\n
SPECIFICATIONS
\n
Nominal Voltage 12.8v
\n
Nominal Capacity (250C, 0.33C) 100Ah
\n
Terminal M8
\n
Length (mm) 306 ± 2mm
\n
Width (mm) 168 ± 2mm
\n
Height (mm) 216 ± 2mm
\n
Weight 12.2kg
\n
Max Charge Voltage 14.6 ± 0.1V
\n
Standby 13.8 ± 0.1V
\n
Cut off Voltage 10V
\n
Max. Discharge Current 95A
\n
Max. Pulse Discharge Current (3 Sec) 350A
\n
Max. Charge Current 95A
\n
Recommended Current Charge < 50A
\n
Cycle Life (100% DoD) > 2000
\n
Operating Temp - Charge 0 - 50C
\n
Operating Temp - Discharge -20 - 55C
\n
Short Circuit Release Load Release
\n
Max. Series / Parallel Configuration 4P
\n
Bluetooth Connectivity Yes
\n
IEC Certification No. 62619
","published_at":"2023-08-01T10:58:36+10:00","created_at":"2023-08-01T10:25:57+10:00","vendor":"Invicta","type":"Lithium Battery","tags":["Battery","Invicta","Lithium Battery","nambour2024","upsell-enable-1"],"price":105000,"price_min":105000,"price_max":105000,"available":true,"price_varies":false,"compare_at_price":164900,"compare_at_price_min":164900,"compare_at_price_max":164900,"compare_at_price_varies":false,"variants":[{"id":40565271625770,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNL12V100BT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"INVICTA 100AH BLUETOOTH LITHIUM BATTERY 12V - 7 Year Warranty","public_title":null,"options":["Default Title"],"price":105000,"weight":13500,"compare_at_price":164900,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_13.svg?v=1690851190","//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_12_8c626751-af66-4efe-8964-bf561754e691.svg?v=1690851190"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_13.svg?v=1690851190","options":["Title"],"media":[{"alt":null,"id":23047180058666,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_13.svg?v=1690851190"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_13.svg?v=1690851190","width":940},{"alt":null,"id":23047177830442,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_12_8c626751-af66-4efe-8964-bf561754e691.svg?v=1690851190"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_12_8c626751-af66-4efe-8964-bf561754e691.svg?v=1690851190","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
Invicta Battery SNL12V100BT
\n
ABOUT INVICTA LITHIUM
\n
The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications.
\n
The Bluetooth feature is available on any battery in the Invicta range that ends in BT. It allows the user to conveniently monitor critical information about the battery, which includes charge, discharge, capacity, temperature, voltage and BMS safety features. All via a free application which can be downloaded on any Apple or Android device. This can be especially useful as conventional testing can be difficult and inaccurate. It can also help if the battery has been placed in a hard to reach spot, like behind the seat or battery box, as monitoring can be achieved from 5 meters away. The Invicta Bluetooth cannot be put in series, and for this reason, we have made available a 24V and 36V option to ensure you have access to a solution that will be suitable.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
FEATURES & BENEFITS
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA • High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Fast recharge Battery is charged and ready to be used sooner • Flat Discharge Curve Longer run time & more efficient use of capacity
\n
Extremely low self-discharge rate Can sit unused for longer periods of time
\n
UL1642 at cell level • IEC Certified
\n
\n Bluetooth monitoring via a free mobile application allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System. The Bluetooth capabilities can also be used to help troubleshoot system issues.\n
The Slimline incorporates a “Built-In Reset Port\" with a separate plug for wiring in a Remote switch making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the remote reset button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
\n
Extremely compact size W 530 x H 600 x D 83 mm. All connection points for the battery are at one end including all Comms Ports and Reset Port.
\n
Reset button is not included on the battery itself, we have opted for a button that can be remotely mounted elsewhere in the install. This allows for a much easier restart process for customers and also keeps the battery more water tight with less chance of water ingress.
\n
Comms Ports are both RJ45 remote ports with CAN output. Both are reserved for future integration and functionality.
\n
Water resistant metal casing meeting IP64 rating and all external bolts and fittings are blind so limits the chance for water to travel from external to internal. Rubber style seals between all metal framing. Frames overlap as well to help avoid water ingress.
\n
\n
\n
The Enerdrive B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
The 200Ah Slimline battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
\n
This product is not suitable to mount anywhere with the possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY
\n
Specifications
\n
\n\n
\n
Normal Specification
\n
EPL-200BT-12V-SLIM
\n
\n\n\n
\n
Nominal Voltage
\n
12.8V
\n
\n
\n
Nominal Capacity
\n
200Ah
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
≥ 2000 Cycles
\n
\n
\n
Standard Charge Specification (Lithium profile charger required)
\n
\n
\n
Battery Charge Temperature
\n
0 ̴ 45°C
\n
\n
\n
Normal Charge Voltage CV/CC*
\n
14.20 ̴ 14.60V
\n
\n
\n
Standby (Float) Voltage
\n
13.50 ̴ 13.80V
\n
\n
\n
Maximum Charge Current
\n
150A @ 25°C for 30mins
\n
\n
\n
Recommended Charge Current for Maximum Life
\n
60A-120A
\n
\n
\n
Standard Discharge Specification
\n
\n
\n
Battery Discharge Temperature
\n
-20 ̴ 60°C
\n
\n
\n
Battery Output Voltage Range
\n
11.00 ̴ 14.60V
\n
\n
\n
Maximum Discharge Current
\n
250A@25°C ± 5°C for 30mins
\n
\n
\n
Pulse Discharge Current
\n
450A for 1.0s
\n
\n
\n
Discharge Cut-off Voltage
\n
≤11.20V
\n
\n
\n
Circuit Protection
\n
The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
\n
\n
\n
Over-Charge Protection
\n
\n
\n
Over-charge Protection Per Cell
\n
3.90V ± 0.03V
\n
\n
\n
Over-charge Release Per Cell
\n
3.60V ± 0.05V
\n
\n
\n
Over-charge Release Method
\n
Discharge below release voltage
\n
\n
\n
Over-Discharge Protection
\n
\n
\n
Over-discharge Protection Per Cell
\n
2.80V ± 0.05V
\n
\n
\n
Over-discharge Release Per Cell
\n
3.20V ± 0.05V
\n
\n
\n
Over-discharge Release Method
\n
Apply Charge/Voltage ≥12.8V
\n
\n
\n
Over Current Protection
\n
\n
\n
Discharge Over Current
\n
280A for 25s – 400A for 3.5s
\n
\n
\n
Protection Reset Time
\n
5s Auto Release
\n
\n
\n
Over Current Release Method
\n
Disconnect Load
\n
\n
\n
Over Temperature Protection
\n
\n
\n
Battery Discharge Over Temperature
\n
Protection to 65°C ± 5°C
\n
\n
\n
\n
Release at 50°C ± 5°C
\n
\n
\n
Battery Charge Over Temperature
\n
Protection to 55°C ± 5°C
\n
\n
\n
\n
Release at 45°C ± 5°C
\n
\n
\n
Short Circuit Protection
\n
Auto release after 5s
\n
\n
\n
Mechanical Characteristics
\n
\n
\n
Dimensions
\n
Length 530mm
\n
\n
\n
\n
Depth 83mm
\n
\n
\n
\n
Height 600mm
\n
\n
\n
Weight
\n
Approx 30. Kg
\n
\n
\n
Case Construction
\n
Powder Coated Zinc Plate
\n
\n
\n
Storage Information
\n
\n
\n
Temperature & Humidity Range
\n
≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH
\n
\n
\n
\n
≥ 30 days -10°C ̴ 45°C, 5 ̴ 75% RH
\n
\n
\n
Self-discharge Rate
\n
≤ 3% Per Month
\n
\n\n
\n
Note: Specifications subject to change without notice.
The Slimline incorporates a “Built-In Reset Port\" with a separate plug for wiring in a Remote switch making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the remote reset button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
\n
Extremely compact size W 530 x H 600 x D 83 mm. All connection points for the battery are at one end including all Comms Ports and Reset Port.
\n
Reset button is not included on the battery itself, we have opted for a button that can be remotely mounted elsewhere in the install. This allows for a much easier restart process for customers and also keeps the battery more water tight with less chance of water ingress.
\n
Comms Ports are both RJ45 remote ports with CAN output. Both are reserved for future integration and functionality.
\n
Water resistant metal casing meeting IP64 rating and all external bolts and fittings are blind so limits the chance for water to travel from external to internal. Rubber style seals between all metal framing. Frames overlap as well to help avoid water ingress.
\n
\n
\n
The Enerdrive B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
The 200Ah Slimline battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
\n
This product is not suitable to mount anywhere with the possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY
\n
Specifications
\n
\n\n
\n
Normal Specification
\n
EPL-200BT-12V-SLIM
\n
\n\n\n
\n
Nominal Voltage
\n
12.8V
\n
\n
\n
Nominal Capacity
\n
200Ah
\n
\n
\n
Cycle Life (DOD – 80% under controlled conditions)
\n
≥ 2000 Cycles
\n
\n
\n
Standard Charge Specification (Lithium profile charger required)
\n
\n
\n
Battery Charge Temperature
\n
0 ̴ 45°C
\n
\n
\n
Normal Charge Voltage CV/CC*
\n
14.20 ̴ 14.60V
\n
\n
\n
Standby (Float) Voltage
\n
13.50 ̴ 13.80V
\n
\n
\n
Maximum Charge Current
\n
150A @ 25°C for 30mins
\n
\n
\n
Recommended Charge Current for Maximum Life
\n
60A-120A
\n
\n
\n
Standard Discharge Specification
\n
\n
\n
Battery Discharge Temperature
\n
-20 ̴ 60°C
\n
\n
\n
Battery Output Voltage Range
\n
11.00 ̴ 14.60V
\n
\n
\n
Maximum Discharge Current
\n
250A@25°C ± 5°C for 30mins
\n
\n
\n
Pulse Discharge Current
\n
450A for 1.0s
\n
\n
\n
Discharge Cut-off Voltage
\n
≤11.20V
\n
\n
\n
Circuit Protection
\n
The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
\n
\n
\n
Over-Charge Protection
\n
\n
\n
Over-charge Protection Per Cell
\n
3.90V ± 0.03V
\n
\n
\n
Over-charge Release Per Cell
\n
3.60V ± 0.05V
\n
\n
\n
Over-charge Release Method
\n
Discharge below release voltage
\n
\n
\n
Over-Discharge Protection
\n
\n
\n
Over-discharge Protection Per Cell
\n
2.80V ± 0.05V
\n
\n
\n
Over-discharge Release Per Cell
\n
3.20V ± 0.05V
\n
\n
\n
Over-discharge Release Method
\n
Apply Charge/Voltage ≥12.8V
\n
\n
\n
Over Current Protection
\n
\n
\n
Discharge Over Current
\n
280A for 25s – 400A for 3.5s
\n
\n
\n
Protection Reset Time
\n
5s Auto Release
\n
\n
\n
Over Current Release Method
\n
Disconnect Load
\n
\n
\n
Over Temperature Protection
\n
\n
\n
Battery Discharge Over Temperature
\n
Protection to 65°C ± 5°C
\n
\n
\n
\n
Release at 50°C ± 5°C
\n
\n
\n
Battery Charge Over Temperature
\n
Protection to 55°C ± 5°C
\n
\n
\n
\n
Release at 45°C ± 5°C
\n
\n
\n
Short Circuit Protection
\n
Auto release after 5s
\n
\n
\n
Mechanical Characteristics
\n
\n
\n
Dimensions
\n
Length 530mm
\n
\n
\n
\n
Depth 83mm
\n
\n
\n
\n
Height 600mm
\n
\n
\n
Weight
\n
Approx 30. Kg
\n
\n
\n
Case Construction
\n
Powder Coated Zinc Plate
\n
\n
\n
Storage Information
\n
\n
\n
Temperature & Humidity Range
\n
≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH
\n
\n
\n
\n
≥ 30 days -10°C ̴ 45°C, 5 ̴ 75% RH
\n
\n
\n
Self-discharge Rate
\n
≤ 3% Per Month
\n
\n\n
\n
Note: Specifications subject to change without notice.
Invicta 12V 150Ah Slimline Front Terminal Lithium Battery With Bluetooth \n
\n
\n
Core Features:
\n
\n
7 Year Warranty
\n
Bluetooth app
\n
Front Terminals \n
\n
100ah LiFePo4
\n
\n
The Invicta Lithium 12V range has been specifically designed for the replacement of similar size Lead acid batteries. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications.
\n
Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities.
\n
Features:
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership.
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety.
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application.
\n
Fast recharge Battery is charged and ready to be used sooner.
\n
Flat Discharge Curve Longer run time & more efficient use of capacity.
\n
Extremely low self-discharge rate Can sit unused for longer periods of time.
\n
UL1642 at cell level.
\n
\n
\n
Bluetooth Capabilities:
\n
Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues.
\n
\n\n
\n
\n
Certification:
\n
Invicta is used in both camping and off-road applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations.
\n
Safety Notes:
\n
\n
Invicta batteries can be installed on either of its sides however not upside down
\n
Invicta batteries are not for under bonnet use
\n
Invicta batteries are not for starting applications
\n
Invicta batteries must use a charger with a lithium profile setting
\n
When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery
Invicta 12V 150Ah Slimline Front Terminal Lithium Battery With Bluetooth \n
\n
\n
Core Features:
\n
\n
7 Year Warranty
\n
Bluetooth app
\n
Front Terminals \n
\n
100ah LiFePo4
\n
\n
The Invicta Lithium 12V range has been specifically designed for the replacement of similar size Lead acid batteries. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications.
\n
Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities.
\n
Features:
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership.
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety.
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application.
\n
Fast recharge Battery is charged and ready to be used sooner.
\n
Flat Discharge Curve Longer run time & more efficient use of capacity.
\n
Extremely low self-discharge rate Can sit unused for longer periods of time.
\n
UL1642 at cell level.
\n
\n
\n
Bluetooth Capabilities:
\n
Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues.
\n
\n\n
\n
\n
Certification:
\n
Invicta is used in both camping and off-road applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations.
\n
Safety Notes:
\n
\n
Invicta batteries can be installed on either of its sides however not upside down
\n
Invicta batteries are not for under bonnet use
\n
Invicta batteries are not for starting applications
\n
Invicta batteries must use a charger with a lithium profile setting
\n
When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery
\n
\n
\n
"},{"id":6873317244970,"title":"Cangoee 12V 110Ah Slimline Lithium Battery Short series","handle":"cangoee-12v-110ah-slimline-lithium-battery-short-series","description":"
The Cangoee Power Bank is a 12V 110Ah Slimline Lithium Power Bank with an internal BMS, inverter suitable battery terminals and multipin service port. The unique Cangoee adaptable power solution is constructed using the latest high quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminium case allowing a staged approach to your vehicle’s power needs.
\n
Features:
\n
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multipin connector for cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
\n Australian designed, engineered, supported and manufactured\n
\n
\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13kg
\n
Dimensions: L 637mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
The Cangoee Power Bank is a 12V 110Ah Slimline Lithium Power Bank with an internal BMS, inverter suitable battery terminals and multipin service port. The unique Cangoee adaptable power solution is constructed using the latest high quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminium case allowing a staged approach to your vehicle’s power needs.
\n
Features:
\n
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multipin connector for cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
\n Australian designed, engineered, supported and manufactured\n
\n
\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13kg
\n
Dimensions: L 637mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v & 36v 100Ah, the Enerdrive B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium = 320Ah AGM
\n
300Ah Lithium = 480Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note; The B-TEC battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
\n
The 125Ah G2 battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger than Enerdrive B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
\n
\n
\n
Specifications
\n
\n
\n\n
\n
Enerdrive Part Number
\n
SP-EN180W-B
\n
\n\n\n
\n
Max Power Pm(W)
\n
180
\n
\n
\n
Power Tolerance %
\n
± 3%
\n
\n
\n
Max Power Voltage Vm(V)
\n
19.8
\n
\n
\n
Max Power Current Im(A)
\n
9.10
\n
\n
\n
Open Circuit Voltage Voc(V)
\n
24.10
\n
\n
\n
Short Circuit Current Isc(A)
\n
9,95
\n
\n
\n
Max System Voltage (VDC)
\n
1000
\n
\n
\n
Dimensions (mm)
\n
1482 x 680 x 35
\n
\n
\n
Weight (kg)
\n
11.5
\n
\n
\n
Test Conditions
\n
1000W/m² , AM1.5 , 25°C
\n
\n\n
\n
\n\n
Note: Specifications subject to change without notice.
\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from Shoptimized is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
As each kit is custom built it may take us some time to process and dispatch your order.
\n
\n
2 weeks estimateddispatch time
\n
Shipping can take 1-2 weeks depending on your location and postal service
\n
\n
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v & 36v 100Ah, the Enerdrive B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium = 320Ah AGM
\n
300Ah Lithium = 480Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note; The B-TEC battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
\n
The 125Ah G2 battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger than Enerdrive B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
\n
\n
\n
Specifications
\n
\n
\n\n
\n
Enerdrive Part Number
\n
SP-EN180W-B
\n
\n\n\n
\n
Max Power Pm(W)
\n
180
\n
\n
\n
Power Tolerance %
\n
± 3%
\n
\n
\n
Max Power Voltage Vm(V)
\n
19.8
\n
\n
\n
Max Power Current Im(A)
\n
9.10
\n
\n
\n
Open Circuit Voltage Voc(V)
\n
24.10
\n
\n
\n
Short Circuit Current Isc(A)
\n
9,95
\n
\n
\n
Max System Voltage (VDC)
\n
1000
\n
\n
\n
Dimensions (mm)
\n
1482 x 680 x 35
\n
\n
\n
Weight (kg)
\n
11.5
\n
\n
\n
Test Conditions
\n
1000W/m² , AM1.5 , 25°C
\n
\n\n
\n
\n\n
Note: Specifications subject to change without notice.
\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n\nOrdering from Shoptimized is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n
\n\n
\n\n
\n
\n
Postage Time Frames:
\n
As each kit is custom built it may take us some time to process and dispatch your order.
\n
\n
2 weeks estimateddispatch time
\n
Shipping can take 1-2 weeks depending on your location and postal service
\n
\n
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.
\n
"},{"id":7503377858602,"title":"Invicta Black 100ah Lithium Battery - 5yr Warranty","handle":"invicta-black-100ah-lithium-battery-5yr-warranty","description":"
\n
Invicta Black: Affordable Lithium Power, Redefined For Peace Of Mind
\n
Introducing Invicta Black, a new range of affordable lithium batteries designed to deliver exceptional performance without breaking the bank.
\n
Crafted with the same meticulous attention to detail that Invicta is renowned for, Invicta Black batteries offer a budget-friendly solution that doesn’t compromise on quality or reliability. Engineered to our exact standards, these batteries are built to last, providing you with years of dependable power.
\n
\n
Unmatched Value
\n
Experience the power of lithium batteries without the premium price tag. Invicta Black batteries offer exceptional performance at an affordable cost, making them the ideal choice for end-users who need a affordable lithium solution. These batteries deliver reliable and long-lasting power, allowing you to enjoy the benefits of lithium technology without breaking the bank.
\n
Invicta Quality
\n
Trust the Invicta name for superior quality and reliability. Invicta Black batteries are built to the same high standards as our premium range, ensuring long-lasting performance and peace of mind. Every component is carefully selected and tested to meet our exact specifications, complete with 5 year warranty, guaranteeing exceptional quality and durability.
\n
Bluetooth Monitoring
\n
Keep track of your battery’s status with our advanced Bluetooth monitoring system. Easily monitor battery voltage, state of charge, and more from the convenience of your smartphone. This real-time information empowers you to make informed decisions and optimise your battery’s performance.
\n
Engineered to Our Specifications
\n
Invicta Black batteries are designed and manufactured to our exact specifications, ensuring optimal performance and compatibility with a wide range of applications. Our engineers have carefully selected the highest quality components and employed advanced manufacturing techniques to deliver a product that exceeds expectations.
\n
\n
\n
Why Choose Invicta Black?
\n
\n
\nAffordability:Enjoy the benefits of lithium batteries without breaking the bank. Invicta Black offers exceptional value for money, making it the perfect choice for consumers looking for a affordable lithium solution.
\n
\nReliability:Count on Invicta Black batteries to deliver consistent and reliable power. With a 5 year warranty these batteries are built to last, and provide years of dependable performance.
\n
\nConvenience:Our Bluetooth monitoring system makes it easy to keep track of your battery’s status. Monitor voltage, state of charge, and more from the convenience of your smartphone.
\n
\nQuality:Experience the Invicta difference with Invicta Black. These batteries are crafted with the same meticulous attention to detail that Invicta is known for, ensuring superior quality and performance.
\n
\n
Discover the Invicta Black Difference
\n
Discover the exceptional value and performance of Invicta Black batteries. With their budget-friendly price, Invicta quality, Bluetooth monitoring, and engineered design, these batteries are the perfect choice for those seeking affordable and reliable energy solutions.
Invicta Black: Affordable Lithium Power, Redefined For Peace Of Mind
\n
Introducing Invicta Black, a new range of affordable lithium batteries designed to deliver exceptional performance without breaking the bank.
\n
Crafted with the same meticulous attention to detail that Invicta is renowned for, Invicta Black batteries offer a budget-friendly solution that doesn’t compromise on quality or reliability. Engineered to our exact standards, these batteries are built to last, providing you with years of dependable power.
\n
\n
Unmatched Value
\n
Experience the power of lithium batteries without the premium price tag. Invicta Black batteries offer exceptional performance at an affordable cost, making them the ideal choice for end-users who need a affordable lithium solution. These batteries deliver reliable and long-lasting power, allowing you to enjoy the benefits of lithium technology without breaking the bank.
\n
Invicta Quality
\n
Trust the Invicta name for superior quality and reliability. Invicta Black batteries are built to the same high standards as our premium range, ensuring long-lasting performance and peace of mind. Every component is carefully selected and tested to meet our exact specifications, complete with 5 year warranty, guaranteeing exceptional quality and durability.
\n
Bluetooth Monitoring
\n
Keep track of your battery’s status with our advanced Bluetooth monitoring system. Easily monitor battery voltage, state of charge, and more from the convenience of your smartphone. This real-time information empowers you to make informed decisions and optimise your battery’s performance.
\n
Engineered to Our Specifications
\n
Invicta Black batteries are designed and manufactured to our exact specifications, ensuring optimal performance and compatibility with a wide range of applications. Our engineers have carefully selected the highest quality components and employed advanced manufacturing techniques to deliver a product that exceeds expectations.
\n
\n
\n
Why Choose Invicta Black?
\n
\n
\nAffordability:Enjoy the benefits of lithium batteries without breaking the bank. Invicta Black offers exceptional value for money, making it the perfect choice for consumers looking for a affordable lithium solution.
\n
\nReliability:Count on Invicta Black batteries to deliver consistent and reliable power. With a 5 year warranty these batteries are built to last, and provide years of dependable performance.
\n
\nConvenience:Our Bluetooth monitoring system makes it easy to keep track of your battery’s status. Monitor voltage, state of charge, and more from the convenience of your smartphone.
\n
\nQuality:Experience the Invicta difference with Invicta Black. These batteries are crafted with the same meticulous attention to detail that Invicta is known for, ensuring superior quality and performance.
\n
\n
Discover the Invicta Black Difference
\n
Discover the exceptional value and performance of Invicta Black batteries. With their budget-friendly price, Invicta quality, Bluetooth monitoring, and engineered design, these batteries are the perfect choice for those seeking affordable and reliable energy solutions.
The Invicta Xero 12V range has been specifically designed for replacement of similar size Lead acid batteries. The Xero range uses all the benefits of Lithium Iron Phosphate (LiFePO4) technology and pushes the limits in communication possibilities, power, safety and security with its advanced battery technology.
\n
Features & Benefits
\n
\n
Large number of cycles >3000 (100% DoD) Up to 10 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
More communication possibilites with Bluetooth and open CAN bus, this makes connecting devices even easier.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Detachable mounting feet
\n
Secure your battery to the application with detachable mounting feet. Simply remove/attach with a screw driver.
\n
Sealed from the Australian elements IP67 rated
\n
More power and customisation with the ability to connect 4 in series, or 16 in parallel, or up to 4 in series and 4 in parallel. Max discharge
The Invicta Xero 12V range has been specifically designed for replacement of similar size Lead acid batteries. The Xero range uses all the benefits of Lithium Iron Phosphate (LiFePO4) technology and pushes the limits in communication possibilities, power, safety and security with its advanced battery technology.
\n
Features & Benefits
\n
\n
Large number of cycles >3000 (100% DoD) Up to 10 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
More communication possibilites with Bluetooth and open CAN bus, this makes connecting devices even easier.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Detachable mounting feet
\n
Secure your battery to the application with detachable mounting feet. Simply remove/attach with a screw driver.
\n
Sealed from the Australian elements IP67 rated
\n
More power and customisation with the ability to connect 4 in series, or 16 in parallel, or up to 4 in series and 4 in parallel. Max discharge
The Invicta Xero 12V range has been specifically designed for replacement of similar size Lead acid batteries. The Xero range uses all the benefits of Lithium Iron Phosphate (LiFePO4) technology and pushes the limits in communication possibilities, power, safety and security with its advanced battery technology.
\n
Features & Benefits
\n
\n
Large number of cycles >3000 (100% DoD) Up to 10 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
More communication possibilites with Bluetooth and open CAN bus, this makes connecting devices even easier.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Detachable mounting feet
\n
Secure your battery to the application with detachable mounting feet. Simply remove/attach with a screw driver.
\n
Sealed from the Australian elements IP67 rated
\n
More power and customisation with the ability to connect 4 in series, or 16 in parallel, or up to 4 in series and 4 in parallel. Max discharge
The Invicta Xero 12V range has been specifically designed for replacement of similar size Lead acid batteries. The Xero range uses all the benefits of Lithium Iron Phosphate (LiFePO4) technology and pushes the limits in communication possibilities, power, safety and security with its advanced battery technology.
\n
Features & Benefits
\n
\n
Large number of cycles >3000 (100% DoD) Up to 10 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
More communication possibilites with Bluetooth and open CAN bus, this makes connecting devices even easier.
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Detachable mounting feet
\n
Secure your battery to the application with detachable mounting feet. Simply remove/attach with a screw driver.
\n
Sealed from the Australian elements IP67 rated
\n
More power and customisation with the ability to connect 4 in series, or 16 in parallel, or up to 4 in series and 4 in parallel. Max discharge
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, theB-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The Enerdrive | DometicB-TECG2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Please note that a fully discharged battery (BMS is off) requires charging within 14 days to avoid cell damage.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium = 320Ah AGM
\n
300Ah Lithium = 480Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
With over a decade of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note; The B-TEC battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single battery’s BMS.
\n
The 100Ah G2 battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger than EnerdriveB-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
Please note B-TEC batteries must not be installed – • In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual. • In wet areas such as caravan chassis mounts, open ute trays or boat deck areas. • Inside compartments dedicated to carrying gas.
\n
This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.
\n
2023 Standards Update: With some confusion regarding the up coming standards changes and how they will effect battery fitments for future builds including upgrades to existing builds, ENERDRIVE | DOMETIC have created a fitment guide. This guide is specific to our e-LITE and B-TEC range of batteries and has been designed to cover all portions of the battery installation requirements within the new standard. Please note this guide is specific to Enerdrive batteries and does not apply to any other manufacturer.
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, theB-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
\n
Smart Phone Monitoring System
\n
The Enerdrive | DometicB-TECG2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
\n
\n
Battery Capacity
\n
Battery Voltage
\n
Battery Current (Amps)
\n
Battery State of Charge (SOC)
\n
Battery State of Health (SOH)
\n
Battery Status
\n
Individual Cell Voltage
\n
Battery Temperature
\n
Battery Cycles
\n
Battery Alarms
\n
Battery Event Information
\n
\n
Battery Management System
\n
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Please note that a fully discharged battery (BMS is off) requires charging within 14 days to avoid cell damage.
\n
Size & Weight Savings
\n
Lithium v AGM Capacities;
\n
\n
100Ah Lithium = 160Ah AGM
\n
125Ah Lithium = 200Ah AGM
\n
200Ah Lithium = 320Ah AGM
\n
300Ah Lithium = 480Ah AGM
\n
\n
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
\n
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
\n
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
\n
The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
\n
With over a decade of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
\n
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
\n
Please Note; The B-TEC battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single battery’s BMS.
\n
The 100Ah G2 battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
\n
If you are requiring a battery system larger than EnerdriveB-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
\n
Please note B-TEC batteries must not be installed – • In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual. • In wet areas such as caravan chassis mounts, open ute trays or boat deck areas. • Inside compartments dedicated to carrying gas.
\n
This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.
\n
2023 Standards Update: With some confusion regarding the up coming standards changes and how they will effect battery fitments for future builds including upgrades to existing builds, ENERDRIVE | DOMETIC have created a fitment guide. This guide is specific to our e-LITE and B-TEC range of batteries and has been designed to cover all portions of the battery installation requirements within the new standard. Please note this guide is specific to Enerdrive batteries and does not apply to any other manufacturer.
"},{"id":7170046132266,"title":"Invicta Super Slim 12V 200Ah LiFePO4 Battery Bluetooth","handle":"invicta-super-slim-12v-200ah-lifepo4-battery-bluetooth","description":"
Super Slim And Robust Design
\n
The Invicta Super Slim lithium battery has been designed to be the slimmest battery ever from Invicta. As vehicle manufacturers continue to push internal design limits on their vehicles, the traditional lithium battery is becoming harder and harder to fit in increasingly reduced available space.
\n
The Invicta Super Slim lithium battery was designed to combat this issue by using a 65mm wide frame, perfect for slipping behind the back seat or anywhere that might be a tight space. Its metal case also ensures it can handle any knocks or bumps when squeezed in a tight space. And all this without sacrificing any performance thanks to its prismatic cell construction.
\n
High-Performance Capabilities
\n
Don’t let its size fool you, the Invicta Super Slim range still has all the performance you will need when going on your next adventure. This includes integrated BMS with protections, high-discharge rate with over-rated Anderson plugs, Bluetooth monitoring, 1800W or 3000W inverter compatibility, and all backed by a 5-year full replacement warranty.
\n
Bluetooth Monitoring
\n
Sharing the same Bluetooth monitoring platform as our Invicta Hybrid Starter range, you can be sure you are getting the most accurate data available. Easy to download and free for all Invicta customers, simply follow the link below for most Android and Apple smart devices. Easily monitor current, voltage, status, cycles and capacity in one space.
The Invicta Super Slim lithium battery has been designed to be the slimmest battery ever from Invicta. As vehicle manufacturers continue to push internal design limits on their vehicles, the traditional lithium battery is becoming harder and harder to fit in increasingly reduced available space.
\n
The Invicta Super Slim lithium battery was designed to combat this issue by using a 65mm wide frame, perfect for slipping behind the back seat or anywhere that might be a tight space. Its metal case also ensures it can handle any knocks or bumps when squeezed in a tight space. And all this without sacrificing any performance thanks to its prismatic cell construction.
\n
High-Performance Capabilities
\n
Don’t let its size fool you, the Invicta Super Slim range still has all the performance you will need when going on your next adventure. This includes integrated BMS with protections, high-discharge rate with over-rated Anderson plugs, Bluetooth monitoring, 1800W or 3000W inverter compatibility, and all backed by a 5-year full replacement warranty.
\n
Bluetooth Monitoring
\n
Sharing the same Bluetooth monitoring platform as our Invicta Hybrid Starter range, you can be sure you are getting the most accurate data available. Easy to download and free for all Invicta customers, simply follow the link below for most Android and Apple smart devices. Easily monitor current, voltage, status, cycles and capacity in one space.
Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances.
\n
As well as utilising LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery.As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
The Invicta Lithium range comes with all the benefits of LiFePO4 composition in either the standard 12V SLA case sizes or 24V versions for larger applications
\n
With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilisation of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications.
\n
With the all new SNL range you can even monitor the health and status of your batteries on your phone via Bluetooth wireless communication.
\n
*IEC Certification on selected models only
\n
Feature & Benefits
\n
\n
IEC Certification on the combination of BMS and individual cell for complete safety peace of mind
\n
High energy density (less than half the weight of SLA) lowering total weight of application
\n
Fast recharge, battery is charged and ready to be used sooner
\n
Flat discharge curve, longer run time and more efficient use of capacity
\n
Extremely low self-discharge rate, can sit unused for longer periods of time
\n
Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against over charge/discharge, temperature and short circuit providing the highest degree of safety.
\n
Bluetooth versions available, monitor the health and state of your battery from your phone
\n
Greater capacity utilisation 60% more than SLA, gives longer runtime than equivilent SLA
\n
\n
Applications
\n
\n
Mobility Devices
\n
Caravan and camping
\n
Solar energy Storage
\n
UPS and Critical power
\n
Personal power packs
\n
Medical Equipment
\n
\n
Battery Type:Lithium Iron Phosphate Battery Specs:12v 300AH Battery Size (LxWxH):518x271x222 Warranty: 7 Years
Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances.
\n
As well as utilising LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery.As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
The Invicta Lithium range comes with all the benefits of LiFePO4 composition in either the standard 12V SLA case sizes or 24V versions for larger applications
\n
With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilisation of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications.
\n
With the all new SNL range you can even monitor the health and status of your batteries on your phone via Bluetooth wireless communication.
\n
*IEC Certification on selected models only
\n
Feature & Benefits
\n
\n
IEC Certification on the combination of BMS and individual cell for complete safety peace of mind
\n
High energy density (less than half the weight of SLA) lowering total weight of application
\n
Fast recharge, battery is charged and ready to be used sooner
\n
Flat discharge curve, longer run time and more efficient use of capacity
\n
Extremely low self-discharge rate, can sit unused for longer periods of time
\n
Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against over charge/discharge, temperature and short circuit providing the highest degree of safety.
\n
Bluetooth versions available, monitor the health and state of your battery from your phone
\n
Greater capacity utilisation 60% more than SLA, gives longer runtime than equivilent SLA
\n
\n
Applications
\n
\n
Mobility Devices
\n
Caravan and camping
\n
Solar energy Storage
\n
UPS and Critical power
\n
Personal power packs
\n
Medical Equipment
\n
\n
Battery Type:Lithium Iron Phosphate Battery Specs:12v 300AH Battery Size (LxWxH):518x271x222 Warranty: 7 Years
\n
Weight- 35kg
"},{"id":7013321834538,"title":"Invicta Power Station 116ah Lithium Battery w/Inverter","handle":"invicta-power-station-116ah-w-inverter","description":"\n
Invicta Power At Your Fingertips
\n
Designed with versatility in mind, the Invicta Power Station gives you 12 outlet points for DC and AC accessories to connect your home appliances easily. With a mix of DC ports, including USB A, USB C, Car Socket, and DC5521, supply anything from 5V to 24V depending on the application’s requirements. Also, power your 240V appliances with any of the 4 AC outlets, which utilise an internal 1600W Pure Sine AC Inverter. Now you can take your kettle, espresso machine or air compressor on your trip away.
\n
Charging is even easier, now you don’t need a complicated and expensive charging system to keep your battery topped up. Simply use the supplied solar cable, DC adapter cable or AC adapter cable to connect to your choice of supply power and instantly start charging.
\n
The Invicta Power Station also comes with a host of certifications and protections to ensure it is operating as safely as possible. Be confident knowing that the Invicta Power Station comes with the Invicta Lithium level of quality assurance that Australia has come to know and trust.
","published_at":"2023-11-17T09:46:56+10:00","created_at":"2023-11-17T09:46:56+10:00","vendor":"Invicta","type":"Lithium Battery","tags":["Lithium Battery","nambour2024"],"price":269900,"price_min":269900,"price_max":269900,"available":true,"price_varies":false,"compare_at_price":269900,"compare_at_price_min":269900,"compare_at_price_max":269900,"compare_at_price_varies":false,"variants":[{"id":40764792733738,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNLPS1600","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Invicta Power Station 116ah Lithium Battery w/Inverter","public_title":null,"options":["Default Title"],"price":269900,"weight":16000,"compare_at_price":269900,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/invicta-lithium-battery-invicta-power-station-116ah-lithium-battery-w-inverter-30828930236458.webp?v=1700178576"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/invicta-lithium-battery-invicta-power-station-116ah-lithium-battery-w-inverter-30828930236458.webp?v=1700178576","options":["Title"],"media":[{"alt":"Invicta Lithium Battery Invicta Power Station 116ah Lithium Battery w/Inverter","id":23276757581866,"position":1,"preview_image":{"aspect_ratio":1,"height":1369,"width":1369,"src":"//accelerateoffgrid.com.au/cdn/shop/files/invicta-lithium-battery-invicta-power-station-116ah-lithium-battery-w-inverter-30828930236458.webp?v=1700178576"},"aspect_ratio":1,"height":1369,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/invicta-lithium-battery-invicta-power-station-116ah-lithium-battery-w-inverter-30828930236458.webp?v=1700178576","width":1369}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\n
Invicta Power At Your Fingertips
\n
Designed with versatility in mind, the Invicta Power Station gives you 12 outlet points for DC and AC accessories to connect your home appliances easily. With a mix of DC ports, including USB A, USB C, Car Socket, and DC5521, supply anything from 5V to 24V depending on the application’s requirements. Also, power your 240V appliances with any of the 4 AC outlets, which utilise an internal 1600W Pure Sine AC Inverter. Now you can take your kettle, espresso machine or air compressor on your trip away.
\n
Charging is even easier, now you don’t need a complicated and expensive charging system to keep your battery topped up. Simply use the supplied solar cable, DC adapter cable or AC adapter cable to connect to your choice of supply power and instantly start charging.
\n
The Invicta Power Station also comes with a host of certifications and protections to ensure it is operating as safely as possible. Be confident knowing that the Invicta Power Station comes with the Invicta Lithium level of quality assurance that Australia has come to know and trust.
"},{"id":7004621996074,"title":"Invicta Hybrid Lithium Extreme 80Ah Max SNLHMAXL","handle":"invicta-hybrid-lithium-extreme-80ah-max-snlhmaxl","description":"
\n
\n
\n
\n
\n
\n
INVICTA HYBRID STARTER
\n
Invicta Hybrid Starter batteries are a dual-purpose starting and deep-cycle lithium solution that can withstand high-heat environments due to their heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output up to 1600CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
INVICTA HYBRID STARTER FEATURES
\n
\n
3-year full replacement warranty
\n
Drop-in starter battery replacement
\n
Lightweight LiFePO4 chemistry
\n
Engineered BMS for high continuous charge/discharge
\n
Pouch cell design for discharge and charging flexibility
\n
Jumpstart feature
\n
High CCA capabilities
\n
Charge directly from the alternator
\n
Standard automotive case sizes
\n
Heat resistant technology for high-heat applications
\n
IP 56 Rated
\n
IEC Certified
\n
\n
Battery Type- Lithium Phosphate Iron Battery Specs- 12.8v/80ah/1400CCA Battery Size (LxWxH)-140x30.6x16.8 Battery Weight-10.3kg Max Discharge-800 Terminal Type- M8 Bluetooth- Yes
\n
\n
Features & Benefits
\n
\n
\n
Australian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.
\n
\n
\n
Dual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\n
Pouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\n
Charge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\n
Heat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\n
Jump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.
\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
Invicta Hybrid Starter batteries are a dual-purpose starting and deep-cycle lithium solution that can withstand high-heat environments due to their heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output up to 1600CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
INVICTA HYBRID STARTER FEATURES
\n
\n
3-year full replacement warranty
\n
Drop-in starter battery replacement
\n
Lightweight LiFePO4 chemistry
\n
Engineered BMS for high continuous charge/discharge
\n
Pouch cell design for discharge and charging flexibility
\n
Jumpstart feature
\n
High CCA capabilities
\n
Charge directly from the alternator
\n
Standard automotive case sizes
\n
Heat resistant technology for high-heat applications
\n
IP 56 Rated
\n
IEC Certified
\n
\n
Battery Type- Lithium Phosphate Iron Battery Specs- 12.8v/80ah/1400CCA Battery Size (LxWxH)-140x30.6x16.8 Battery Weight-10.3kg Max Discharge-800 Terminal Type- M8 Bluetooth- Yes
\n
\n
Features & Benefits
\n
\n
\n
Australian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.
\n
\n
\n
Dual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\n
Pouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\n
Charge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\n
Heat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\n
Jump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.
\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
\n
\n
\n
\n
Specifications\n
\n
\n\n
\n
\n
Model
\n
\n
\n
Features
\n
\n
\n
Length
\n
\n
\n
Width
\n
\n
\n
Height/Terminal Height
\n
\n
\n
Terminal Type
\n
\n
\n
Nominal Voltage
\n
\n
\n
Nominal Capacity
\n
\n
\n
Max Discharge Current
\n
\n
\n
CCA
\n
\n
\n
Weight
\n
(Kgs)
\n
\n
\n
\n
\n
SNLHMAXL
\n
\n
\n
Jump start functionality
\n
\n
\n
306
\n
\n
\n
168
\n
\n
\n
211
\n
\n
\n
M8
\n
\n
\n
12.8
\n
\n
\n
80
\n
\n
\n
800
\n
\n
\n
1400
\n
\n
\n
10.3
\n
\n
\n\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n\n
\n
\n
"},{"id":6941118398506,"title":"Redarc 200AH Lithium Deep Cycle Battery","handle":"redarc-200ah-lithium-deep-cycle-battery","description":"REDARC's 12V 200Ah lithium deep cycle battery has a recommended continuous discharge of 100A and is for larger applications where maximum energy storage is required and can also be used with a 1000W inverter (per battery).\n
Its 100A discharge rate gives your high draw equipment the powerful current they need to run effectively, while having plenty of reserve capacity for low draw devices such as USB charging devices, keeping you off grid for longer.
\n
This lithium battery will offer 200Ah amount of usable power to help run 240v appliances like a larger fridge, toaster, coffee machine or hairdryer, washing machine, TV, air conditioner or an electric kettle when paired with an inverter. Or even if you have basic power needs, just one battery will charge USB devices, run 12v portable fridges, basic LED lights and water pumps without the need for an inverter.
\n
REDARC Lithium Deep Cycle Batteries are the ultimate in deep-cycle battery technology delivering unrivalled performance and battery life.
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased energy storage. You can parallel up to six 200Ah batteries together.
\n
Specifications
\n
\n\n
\n
BATTERY CHEMISTRY
\n
Lithium
\n
\n
\n
BATTERY CAPACITY
\n
200Ah
\n
\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
MAX. CHARGER CURRENT
\n
100A
\n
\n
\n
WEIGHT
\n
25.5kg
\n
\n
\n
HEIGHT
\n
242 mm
\n
\n
\n
WIDTH
\n
485 mm
\n
\n
\n
DEPTH | LENGTH
\n
170 mm
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n\n
","published_at":"2023-08-31T08:06:45+10:00","created_at":"2023-08-02T16:12:42+10:00","vendor":"Redarc","type":"Lithium Battery","tags":["Battery","Lithium Battery","Redarc"],"price":319000,"price_min":319000,"price_max":319000,"available":true,"price_varies":false,"compare_at_price":319800,"compare_at_price_min":319800,"compare_at_price_max":319800,"compare_at_price_varies":false,"variants":[{"id":40565660024874,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LBAT12200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Redarc 200AH Lithium Deep Cycle Battery","public_title":null,"options":["Default Title"],"price":319000,"weight":25700,"compare_at_price":319800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"9338628006472","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_84.svg?v=1690956763","//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_85.svg?v=1690956825"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_84.svg?v=1690956763","options":["Title"],"media":[{"alt":null,"id":23048402272298,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_84.svg?v=1690956763"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_84.svg?v=1690956763","width":940},{"alt":null,"id":23048402698282,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_85.svg?v=1690956825"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_85.svg?v=1690956825","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"REDARC's 12V 200Ah lithium deep cycle battery has a recommended continuous discharge of 100A and is for larger applications where maximum energy storage is required and can also be used with a 1000W inverter (per battery).\n
Its 100A discharge rate gives your high draw equipment the powerful current they need to run effectively, while having plenty of reserve capacity for low draw devices such as USB charging devices, keeping you off grid for longer.
\n
This lithium battery will offer 200Ah amount of usable power to help run 240v appliances like a larger fridge, toaster, coffee machine or hairdryer, washing machine, TV, air conditioner or an electric kettle when paired with an inverter. Or even if you have basic power needs, just one battery will charge USB devices, run 12v portable fridges, basic LED lights and water pumps without the need for an inverter.
\n
REDARC Lithium Deep Cycle Batteries are the ultimate in deep-cycle battery technology delivering unrivalled performance and battery life.
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased energy storage. You can parallel up to six 200Ah batteries together.
\n
Specifications
\n
\n\n
\n
BATTERY CHEMISTRY
\n
Lithium
\n
\n
\n
BATTERY CAPACITY
\n
200Ah
\n
\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
MAX. CHARGER CURRENT
\n
100A
\n
\n
\n
WEIGHT
\n
25.5kg
\n
\n
\n
HEIGHT
\n
242 mm
\n
\n
\n
WIDTH
\n
485 mm
\n
\n
\n
DEPTH | LENGTH
\n
170 mm
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n\n
"},{"id":6941118201898,"title":"Redarc 100AH Heavy Duty Lithium Deep Cycle Battery","handle":"redarc-100ah-heavy-duty-lithium-deep-cycle-battery","description":"\n
The REDARC 12V 100Ah Heavy Duty variant has a recommended continuous discharge of 100A, ideal for applications requiring high currents like air compressors, and can be used with an inverter up to 1000W in size (per battery).
\n
REDARC Lithium Deep Cycle Batteries are the ultimate in deep-cycle battery technology delivering unrivalled performance and battery life.
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased energy storage. You can parallel up to six 100Ah-HD batteries together.
\n
Specifications
\n
\n\n
\n
BATTERY CHEMISTRY
\n
Lithium
\n
\n
\n
BATTERY CAPACITY
\n
100Ah
\n
\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
MAX. CHARGER CURRENT
\n
50A
\n
\n
\n
WEIGHT
\n
11kg
\n
\n
\n
HEIGHT
\n
221 mm
\n
\n
\n
WIDTH
\n
305 mm
\n
\n
\n
DEPTH | LENGTH
\n
165 mm
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n\n
","published_at":"2023-08-31T08:05:11+10:00","created_at":"2023-08-02T16:06:17+10:00","vendor":"Redarc","type":"Lithium Battery","tags":["Battery","Lithium Battery","Redarc"],"price":198000,"price_min":198000,"price_max":198000,"available":true,"price_varies":false,"compare_at_price":199800,"compare_at_price_min":199800,"compare_at_price_max":199800,"compare_at_price_varies":false,"variants":[{"id":40565658353706,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LBAT12100-HD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Redarc 100AH Heavy Duty Lithium Deep Cycle Battery","public_title":null,"options":["Default Title"],"price":198000,"weight":11500,"compare_at_price":199800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"9338628006465","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_82.svg?v=1690956423","//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_83.svg?v=1690956471"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_82.svg?v=1690956423","options":["Title"],"media":[{"alt":null,"id":23048401158186,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_82.svg?v=1690956423"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_82.svg?v=1690956423","width":940},{"alt":null,"id":23048401649706,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_83.svg?v=1690956471"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_83.svg?v=1690956471","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\n
The REDARC 12V 100Ah Heavy Duty variant has a recommended continuous discharge of 100A, ideal for applications requiring high currents like air compressors, and can be used with an inverter up to 1000W in size (per battery).
\n
REDARC Lithium Deep Cycle Batteries are the ultimate in deep-cycle battery technology delivering unrivalled performance and battery life.
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased energy storage. You can parallel up to six 100Ah-HD batteries together.
\n
Specifications
\n
\n\n
\n
BATTERY CHEMISTRY
\n
Lithium
\n
\n
\n
BATTERY CAPACITY
\n
100Ah
\n
\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
MAX. CHARGER CURRENT
\n
50A
\n
\n
\n
WEIGHT
\n
11kg
\n
\n
\n
HEIGHT
\n
221 mm
\n
\n
\n
WIDTH
\n
305 mm
\n
\n
\n
DEPTH | LENGTH
\n
165 mm
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n\n
"},{"id":6941117939754,"title":"Redarc 100AH Lithium Deep Cycle Battery","handle":"redarc-100ah-lithium-deep-cycle-battery","description":"\n
REDARC’s 12V 100Ah standard variant has a recommended continuous discharge of 50A, ideal for applications when high currents are not required for an extended period and can be used with an inverter up to 500W in size (per battery).
\n
Because this battery is classed as low draw, it is perfect for running 12v appliances and devices like basic LED lights, and water pumps and a portable fridge without the need for an inverter.
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased energy storage. You can parallel up to six LiFePO4 100Ah batteries together.
REDARC’s 12V 100Ah standard variant has a recommended continuous discharge of 50A, ideal for applications when high currents are not required for an extended period and can be used with an inverter up to 500W in size (per battery).
\n
Because this battery is classed as low draw, it is perfect for running 12v appliances and devices like basic LED lights, and water pumps and a portable fridge without the need for an inverter.
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased energy storage. You can parallel up to six LiFePO4 100Ah batteries together.
\n
Specifications
\n
\n\n
\n
BATTERY CHEMISTRY
\n
Lithium
\n
\n
\n
BATTERY CAPACITY
\n
100Ah
\n
\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
MAX. CHARGER CURRENT
\n
50A
\n
\n
\n
WEIGHT
\n
11kg
\n
\n
\n
HEIGHT
\n
221 mm
\n
\n
\n
WIDTH
\n
305 mm
\n
\n
\n
DEPTH | LENGTH
\n
165 mm
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n\n
"},{"id":6941117644842,"title":"Redarc 60AH Lithium Deep Cycle Battery","handle":"redarc-60ah-lithium-deep-cycle-battery","description":"
The compact and powerful Lithium Battery solution for a weekend getaway. REDARC’s 12V 60Ah lithium deep cycle battery (LiFePO4) is offered in a slimline design, suitable for installation where space is limited. With a maximum continuous discharge of 85A, it provides a powerful energy solution for its usable capacity and can be used with an inverter up to 850W in size (per battery).
\n
Build the perfect battery bank for your 4WD, RV, camper, caravan, or boat. Light weight with huge capacity, the LiFePO4 batteries deliver longer lasting power, and they are built for Australia’s toughest conditions!
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased LiFePO4 energy storage. You can parallel up to four 60Ah batteries together.
The compact and powerful Lithium Battery solution for a weekend getaway. REDARC’s 12V 60Ah lithium deep cycle battery (LiFePO4) is offered in a slimline design, suitable for installation where space is limited. With a maximum continuous discharge of 85A, it provides a powerful energy solution for its usable capacity and can be used with an inverter up to 850W in size (per battery).
\n
Build the perfect battery bank for your 4WD, RV, camper, caravan, or boat. Light weight with huge capacity, the LiFePO4 batteries deliver longer lasting power, and they are built for Australia’s toughest conditions!
\n
This battery is equipped with an internal Battery Management System (BMS) that can monitor and optimise each cell during charge and discharge to protect the battery pack from over charge, over discharge and short circuit. The internal BMS also allows the balancing of cells within the batteries, allowing them to be configured and used in parallel to increase battery bank capacity for increased LiFePO4 energy storage. You can parallel up to four 60Ah batteries together.
\n
Specifications
\n
\n\n
\n
BATTERY CHEMISTRY
\n
Lithium
\n
\n
\n
BATTERY CAPACITY
\n
60Ah
\n
\n
\n
BLUETOOTH COMPATIBLE
\n
No
\n
\n
\n
TRAILER INSTALL
\n
No
\n
\n
\n
MPPT SOLAR REGULATOR
\n
No
\n
\n
\n
SUITABLE FOR 12V SYSTEMS
\n
No
\n
\n
\n
CABIN/ CANOPY INSTALL
\n
No
\n
\n
\n
ENGINE BAY INSTALL
\n
No
\n
\n
\n
SUITABLE FOR 24V SYSTEMS
\n
No
\n
\n
\n
MAX. CHARGER CURRENT
\n
30A
\n
\n
\n
WEIGHT
\n
8kg
\n
\n
\n
HEIGHT
\n
231 mm
\n
\n
\n
WIDTH
\n
291 mm
\n
\n
\n
DEPTH | LENGTH
\n
106 mm
\n
\n
\n
WARRANTY
\n
2 Years
\n
\n\n
"},{"id":6941013934122,"title":"INVICTA 125AH BLUETOOTH LITHIUM BATTERY 12V - 7 Year Warranty","handle":"invicta-125ah-bluetooth-lithium-battery-12v-7-year-warranty-1","description":"
Invicta Battery SNL12V125BT
\n
ABOUT INVICTA LITHIUM
\n
The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilisation of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications.
\n
FEATURES & BENEFITS
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Fast recharge Battery is charged and ready to be used sooner
\n
\n Flat Discharge Curve Longer run time & more efficient use of capacity\n
\n
Extremely low self-discharge rate Can sit unused for longer periods of time
\n
\n UL1642 at cell level\n
\n
Bluetooth monitoring via a free mobile application allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System. The Bluetooth capabilities can also be used to help troubleshoot system issues.
\n
\n
SPECIFICATIONS
\n
Nominal Voltage12.8V Nominal Capacity (25℃, 0.33C)125Ah TerminalM8 Length (mm)318 ± 2 Width (mm)165 ± 2 Height (mm)215 ± 2 Weight14.8 kg Max Charge Voltage14.6 ± 0.1V Standby13.8 ± 0.1V Cut off Voltage10V Max. Discharge Current (30 mins)100A Max. Pulse Discharge Current (3 Sec)350A Max. Charge Current80A Recommended Current Charge ≤60A Cycle Life (100% DoD)≥ 2000 Operating Temp – Charge0 — 55C Operating Temp – Discharge-20 – 55C Short Circuit Release30 sec Load Release Max. Series / Parallel Configuration4P
\n","published_at":"2023-08-01T10:13:16+10:00","created_at":"2023-08-01T09:33:23+10:00","vendor":"Invicta","type":"Lithium Battery","tags":["Battery","Lithium Battery"],"price":178500,"price_min":178500,"price_max":178500,"available":true,"price_varies":false,"compare_at_price":199900,"compare_at_price_min":199900,"compare_at_price_max":199900,"compare_at_price_varies":false,"variants":[{"id":40565251375146,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNL12V125BT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"INVICTA 125AH BLUETOOTH LITHIUM BATTERY 12V - 7 Year Warranty","public_title":null,"options":["Default Title"],"price":178500,"weight":15000,"compare_at_price":199900,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_11.svg?v=1690847498","//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_12.svg?v=1690847561"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_11.svg?v=1690847498","options":["Title"],"media":[{"alt":null,"id":23047173439530,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_11.svg?v=1690847498"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_11.svg?v=1690847498","width":940},{"alt":null,"id":23047173537834,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_12.svg?v=1690847561"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/BlueYellowAnimatedSaleShopLocalFacebookPost_12.svg?v=1690847561","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
Invicta Battery SNL12V125BT
\n
ABOUT INVICTA LITHIUM
\n
The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications.
\n
The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind.
\n
With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilisation of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications.
\n
FEATURES & BENEFITS
\n
\n
Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership
\n
Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety
\n
Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA
\n
High energy density (less than half of the weight of SLA) Lowering total weight of application
\n
Fast recharge Battery is charged and ready to be used sooner
\n
\n Flat Discharge Curve Longer run time & more efficient use of capacity\n
\n
Extremely low self-discharge rate Can sit unused for longer periods of time
\n
\n UL1642 at cell level\n
\n
Bluetooth monitoring via a free mobile application allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System. The Bluetooth capabilities can also be used to help troubleshoot system issues.
\n
\n
SPECIFICATIONS
\n
Nominal Voltage12.8V Nominal Capacity (25℃, 0.33C)125Ah TerminalM8 Length (mm)318 ± 2 Width (mm)165 ± 2 Height (mm)215 ± 2 Weight14.8 kg Max Charge Voltage14.6 ± 0.1V Standby13.8 ± 0.1V Cut off Voltage10V Max. Discharge Current (30 mins)100A Max. Pulse Discharge Current (3 Sec)350A Max. Charge Current80A Recommended Current Charge ≤60A Cycle Life (100% DoD)≥ 2000 Operating Temp – Charge0 — 55C Operating Temp – Discharge-20 – 55C Short Circuit Release30 sec Load Release Max. Series / Parallel Configuration4P
The Cangoee Powermate is a unique and adaptable power solution, constructed using the very latest, high quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminium case allowing a staged approach to your vehicle’s power needs. Additionally, the Powermate series allows for quick access to individual batteries giving you mobile energy options and optimising the usage of your investment. The Cangoee Powermate delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Features:
\n
\n
110Ah lithium iron battery mini hub with 100A BMS and integrated 20A Smart DC/DC charger and MPPT Solar Controller 75V/15A with BT connectivity.
\n
\nInternal 40A configurable DC/DC charger
\n
75V/15A Smart Solar Controller
\n
Smart Shunt with Bluetooth Connectivity
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Rapid 100A charge rate
\n
100A Discharge & 200A Surge
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection.
\n
MCP multipin connector for DC/DC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Designed and fully assembled in Australia
\n
5 Year Warranty
\n
\n
Specifications:
\n
\n
Capacity: 110AH
\n
Solar Controller: Smart MPPT Solar Controller Input 75V and Output 15A
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.8V
\n
Float Voltage: 13.6V
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. 200A surge
\n
Operating Temp: 0 - 45°C
\n
Weight: 12.4kg
\n
Dimensions: L 295mm (with handle: 330mm), H 230mm, D 140mm
\n
\n \n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
The Cangoee Powermate is a unique and adaptable power solution, constructed using the very latest, high quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminium case allowing a staged approach to your vehicle’s power needs. Additionally, the Powermate series allows for quick access to individual batteries giving you mobile energy options and optimising the usage of your investment. The Cangoee Powermate delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Features:
\n
\n
110Ah lithium iron battery mini hub with 100A BMS and integrated 20A Smart DC/DC charger and MPPT Solar Controller 75V/15A with BT connectivity.
\n
\nInternal 40A configurable DC/DC charger
\n
75V/15A Smart Solar Controller
\n
Smart Shunt with Bluetooth Connectivity
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Rapid 100A charge rate
\n
100A Discharge & 200A Surge
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection.
\n
MCP multipin connector for DC/DC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Designed and fully assembled in Australia
\n
5 Year Warranty
\n
\n
Specifications:
\n
\n
Capacity: 110AH
\n
Solar Controller: Smart MPPT Solar Controller Input 75V and Output 15A
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.8V
\n
Float Voltage: 13.6V
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. 200A surge
\n
Operating Temp: 0 - 45°C
\n
Weight: 12.4kg
\n
Dimensions: L 295mm (with handle: 330mm), H 230mm, D 140mm
\n
\n \n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
"},{"id":6904169136170,"title":"Cangoee Powermate Bank 110Ah lithium iron battery","handle":"cangoee-powermate-bank-110","description":"
The Cangoee Powermate is a unique and adaptable power solution, constructed using the very latest, high quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminium case allowing a staged approach to your vehicle’s power needs. Additionally, the Powermate series allows for quick access to individual batteries giving you mobile energy options and optimising the usage of your investment. The Cangoee Powermate delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Does require external charging source .
\n
Features:
\n
\n
\n110Ah lithium iron battery bank with 100A BMS. Requires external charging device
\n
\nInternal 40A configurable DC/DC charger
\n
75V/15A Smart Solar Controller
\n
Smart Shunt with Bluetooth Connectivity
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Rapid 100A charge rate
\n
100A Discharge & 200A Surge
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection.
\n
MCP multipin connector for DC/DC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Designed and fully assembled in Australia
\n
5 Year Warranty
\n
\n
\n Specifications:\n
\n
\n
Capacity: 110AH
\n
Input/ Output Connector: High current 6mm bus stud with automotive multi pin connector
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.8V
\n
Float Voltage:
\n
13.6V
\n
Charge Current: 100A
\n
Discharge Current: 100A max cont. 200A surge
\n
Operating Temp: 0 - 45°C
\n
Weight: 11.8kg
\n
Dimensions: L 295mm (with handle: 330mm), H 230mm, D 140mm
\n
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
","published_at":"2022-11-15T10:57:48+10:00","created_at":"2022-11-15T10:25:44+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":["Battery","Lithium Battery"],"price":161877,"price_min":161877,"price_max":161877,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40448379617322,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CANR110BA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cangoee Powermate Bank 110Ah lithium iron battery","public_title":null,"options":["Default Title"],"price":161877,"weight":12800,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-powermate-bank-110ah-lithium-iron-battery-30031639085098.png?v=1668473037"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-powermate-bank-110ah-lithium-iron-battery-30031639085098.png?v=1668473037","options":["Title"],"media":[{"alt":"Cangoee Lithium Battery Cangoee Powermate Bank 110Ah lithium iron battery","id":22462540742698,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-powermate-bank-110ah-lithium-iron-battery-30031639085098.png?v=1668473037"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-powermate-bank-110ah-lithium-iron-battery-30031639085098.png?v=1668473037","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
The Cangoee Powermate is a unique and adaptable power solution, constructed using the very latest, high quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminium case allowing a staged approach to your vehicle’s power needs. Additionally, the Powermate series allows for quick access to individual batteries giving you mobile energy options and optimising the usage of your investment. The Cangoee Powermate delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Does require external charging source .
\n
Features:
\n
\n
\n110Ah lithium iron battery bank with 100A BMS. Requires external charging device
\n
\nInternal 40A configurable DC/DC charger
\n
75V/15A Smart Solar Controller
\n
Smart Shunt with Bluetooth Connectivity
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Rapid 100A charge rate
\n
100A Discharge & 200A Surge
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection.
\n
MCP multipin connector for DC/DC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Designed and fully assembled in Australia
\n
5 Year Warranty
\n
\n
\n Specifications:\n
\n
\n
Capacity: 110AH
\n
Input/ Output Connector: High current 6mm bus stud with automotive multi pin connector
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.8V
\n
Float Voltage:
\n
13.6V
\n
Charge Current: 100A
\n
Discharge Current: 100A max cont. 200A surge
\n
Operating Temp: 0 - 45°C
\n
Weight: 11.8kg
\n
Dimensions: L 295mm (with handle: 330mm), H 230mm, D 140mm
\n
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
"},{"id":6904148623402,"title":"Cangoee 110Ah Lithium Iron Battery Canopy Power Hub with 40A DCDC Charger","handle":"cangoee-110ah-lithium-iron-battery-canopy-power-hub-with-40a-dcdc-charger","description":"
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family. With its simple customer interface panel, the Cangoee Power Hub comes in a 110/220Ah configuration, providing up to 200A of continuous discharge, and can combine both DCDC and solar charge inputs for faster simultaneous charging.
\n
Features:
\n
\n
Includes smart shunt, MPPT solar controller, battery protect, isolation switch, solar input, DCDC input, 12V output, 240V charging input and inverter suitable studs
\n
Advanced compact all in one system within installation chassis.
\n
Slim form factor in multiple configurations designed and fully assembled in Australia
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 75-15 (110)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson
\n
Plug and play DCDC charging input - Blue Anderson
\n
AC charging input - Black Anderson
\n
Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
5 Year Warranty
\n
\n
Specifications:
\n
\n
Capacity: 110Ah robust M6 prismatic lithium cells
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Float Voltage: 13.6V
\n
Charge Current: 100A
\n
Discharge Current: 100A max cont. 200A surge
\n
Operating Temperature: 0-45°C
\n
Weight: 18.5kg
\n
Dimensions: L 1060mm, W 268mm, D 61mm
\n
\nPlease note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652. \n
\n
","published_at":"2022-11-15T08:46:18+10:00","created_at":"2022-11-15T08:37:39+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":["Battery","Lithium Battery"],"price":378792,"price_min":378792,"price_max":378792,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40448340951082,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CAN11040S1C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cangoee 110Ah Lithium Iron Battery Canopy Power Hub with 40A DCDC Charger","public_title":null,"options":["Default Title"],"price":378792,"weight":19500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-110ah-lithium-iron-battery-canopy-power-hub-with-40a-dcdc-charger-30031445786666.png?v=1668466192"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-110ah-lithium-iron-battery-canopy-power-hub-with-40a-dcdc-charger-30031445786666.png?v=1668466192","options":["Title"],"media":[{"alt":"Cangoee Lithium Battery Cangoee 110Ah Lithium Iron Battery Canopy Power Hub with 40A DCDC Charger","id":22462348394538,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-110ah-lithium-iron-battery-canopy-power-hub-with-40a-dcdc-charger-30031445786666.png?v=1668466192"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-lithium-battery-cangoee-110ah-lithium-iron-battery-canopy-power-hub-with-40a-dcdc-charger-30031445786666.png?v=1668466192","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family. With its simple customer interface panel, the Cangoee Power Hub comes in a 110/220Ah configuration, providing up to 200A of continuous discharge, and can combine both DCDC and solar charge inputs for faster simultaneous charging.
\n
Features:
\n
\n
Includes smart shunt, MPPT solar controller, battery protect, isolation switch, solar input, DCDC input, 12V output, 240V charging input and inverter suitable studs
\n
Advanced compact all in one system within installation chassis.
\n
Slim form factor in multiple configurations designed and fully assembled in Australia
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 75-15 (110)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson
\n
Plug and play DCDC charging input - Blue Anderson
\n
AC charging input - Black Anderson
\n
Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
5 Year Warranty
\n
\n
Specifications:
\n
\n
Capacity: 110Ah robust M6 prismatic lithium cells
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Float Voltage: 13.6V
\n
Charge Current: 100A
\n
Discharge Current: 100A max cont. 200A surge
\n
Operating Temperature: 0-45°C
\n
Weight: 18.5kg
\n
Dimensions: L 1060mm, W 268mm, D 61mm
\n
\nPlease note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652. \n
\n
"},{"id":6873335169066,"title":"Cangoee Power Hub 110Ah Lithium battery with 40A DCDC Charger and Smart controller/Shunt","handle":"cangoee-power-hub-110-long","description":"
The Cangoee Mini Hub offers a mid-range solution with integrated 40A DCDC, MPPT 75/15 Smart Solar Controller and 500A Smart Shunt with Bluetooth connectivity. This is the perfect solution for tighter spaces, mid-range budgets whilst offering a quality standalone energy and power solution.
\n
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family.
\n
Features:
\n
\n
Advanced compact all in one system within installation chassis
\n
Slim form factor in multiple configurations designed and fully assembled in Australia
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 75-15 (110) or 100-20 (220)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson
\n
Plug and play DCDC charging input - Blue Anderson
\n
AC charging input - Black Anderson
\n
Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
\n\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 19kg
\n
Dimensions: L 750mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
","published_at":"2022-11-15T10:07:34+10:00","created_at":"2022-08-23T11:35:09+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":[],"price":268812,"price_min":268812,"price_max":268812,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40359200358442,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CANL110NO40S15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cangoee Power Hub 110Ah Lithium battery with 40A DCDC Charger and Smart controller/Shunt","public_title":null,"options":["Default Title"],"price":268812,"weight":20000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-power-hub-110ah-lithium-battery-with-40a-dcdc-charger-and-smart-controller-shunt-29731226484778.png?v=1661229476"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-power-hub-110ah-lithium-battery-with-40a-dcdc-charger-and-smart-controller-shunt-29731226484778.png?v=1661229476","options":["Title"],"media":[{"alt":"Accelerate Off-Grid Touring Cangoee Power Hub 110Ah Lithium battery with 40A DCDC Charger and Smart controller/Shunt","id":22157703348266,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-power-hub-110ah-lithium-battery-with-40a-dcdc-charger-and-smart-controller-shunt-29731226484778.png?v=1661229476"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-power-hub-110ah-lithium-battery-with-40a-dcdc-charger-and-smart-controller-shunt-29731226484778.png?v=1661229476","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
The Cangoee Mini Hub offers a mid-range solution with integrated 40A DCDC, MPPT 75/15 Smart Solar Controller and 500A Smart Shunt with Bluetooth connectivity. This is the perfect solution for tighter spaces, mid-range budgets whilst offering a quality standalone energy and power solution.
\n
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family.
\n
Features:
\n
\n
Advanced compact all in one system within installation chassis
\n
Slim form factor in multiple configurations designed and fully assembled in Australia
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 75-15 (110) or 100-20 (220)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson
\n
Plug and play DCDC charging input - Blue Anderson
\n
AC charging input - Black Anderson
\n
Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
\n\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 19kg
\n
Dimensions: L 750mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
"},{"id":6872986583082,"title":"Cangoee Node 12V 75Ah Slimline Lithium Battery with 20Ah DCDC Short series","handle":"cangoee-node-12v-110ah-slimline-lithium-battery-short-series","description":"\n
Ready to go next level and upgrade your in-vehicle power options with a smart and efficient quality kit? This 12/75Ah slimline lithium battery comes equipped with integrated internal BMS, 20A dual stage DCDC charger and service port. The Cangoee Power Node delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Features:
\n
\n
Internal 20A configurable DCDC charger
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multi pin connector for DCDC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Australian designed, engineered, supported and manufactured
\n
\n\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 8.35kg
\n
Dimensions: L 637mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
","published_at":"2022-11-16T09:44:27+10:00","created_at":"2022-08-22T16:03:33+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":[],"price":195742,"price_min":195742,"price_max":195742,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40358163251242,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CANS75NO20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cangoee Node 12V 75Ah Slimline Lithium Battery with 20Ah DCDC Short series","public_title":null,"options":["Default Title"],"price":195742,"weight":8350,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730739945514.png?v=1661207877"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730739945514.png?v=1661207877","options":["Title"],"media":[{"alt":"Accelerate Off-Grid Touring Cangoee Node 12V 110Ah Slimline Lithium Battery with 20Ah DCDC Short series","id":22157223591978,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730739945514.png?v=1661207877"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730739945514.png?v=1661207877","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\n
Ready to go next level and upgrade your in-vehicle power options with a smart and efficient quality kit? This 12/75Ah slimline lithium battery comes equipped with integrated internal BMS, 20A dual stage DCDC charger and service port. The Cangoee Power Node delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Features:
\n
\n
Internal 20A configurable DCDC charger
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multi pin connector for DCDC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Australian designed, engineered, supported and manufactured
\n
\n\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 8.35kg
\n
Dimensions: L 637mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
"},{"id":6873286213674,"title":"Cangoee Node 12V 110Ah Slimline Lithium Battery with 20Ah DCDC Short series","handle":"cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series","description":"
Ready to go next level and upgrade your in-vehicle power options with a smart and efficient quality kit? This 12/110Ah slimline lithium battery comes equipped with integrated internal BMS, 20A dual stage DCDC charger and service port. The Cangoee Power Node delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Features:
\n
\n
Internal 20A configurable DCDC charger
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multi pin connector for DCDC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Australian designed, engineered, supported and manufactured
\n
\n\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Float Voltage: 13.6
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13.1 kg
\n
Dimensions: L 637mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
","published_at":"2022-11-16T09:42:05+10:00","created_at":"2022-08-23T09:15:50+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":[],"price":207568,"price_min":207568,"price_max":207568,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40359089111082,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CANS110NO20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cangoee Node 12V 110Ah Slimline Lithium Battery with 20Ah DCDC Short series","public_title":null,"options":["Default Title"],"price":207568,"weight":13100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730801385514.png?v=1661210398"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730801385514.png?v=1661210398","options":["Title"],"media":[{"alt":"Accelerate Off-Grid Touring Cangoee Node 12V 110Ah Slimline Lithium Battery with 20Ah DCDC Short series","id":22157271334954,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730801385514.png?v=1661210398"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-cangoee-node-12v-110ah-slimline-lithium-battery-with-20ah-dcdc-short-series-29730801385514.png?v=1661210398","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
Ready to go next level and upgrade your in-vehicle power options with a smart and efficient quality kit? This 12/110Ah slimline lithium battery comes equipped with integrated internal BMS, 20A dual stage DCDC charger and service port. The Cangoee Power Node delivers a cost effective 4WD, canopy, camper system solution time tested, engineer verified, all boxed up and ready to go.
\n
Features:
\n
\n
Internal 20A configurable DCDC charger
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multi pin connector for DCDC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Australian designed, engineered, supported and manufactured
\n
\n\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Float Voltage: 13.6
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13.1 kg
\n
Dimensions: L 637mm (670mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
"},{"id":6873403883562,"title":"Cangoee Node 110Ah Lithium Battery with 40A DCDC Charger Long","handle":"cangoee-110ah-lithium-battery-with-40a-dcdc-charger-long","description":"
Ready to go next level and upgrade your in-vehicle power options with a smart and efficient quality kit? This 12/110Ah slimline lithium battery comes equipped with integrated internal BMS, 40A dual stage DCDC charger and service port. The Cangoee Power Node provides up to 100A of continuous discharge, 100A rapid charge and can be arranged in parallel to deliver increased power.
\n
Features:
\n
\n
Internal 40A configurable DCDC charger
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Rapid 100A charge rate
\n
100A Discharge & 200A Surge
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multipin connector for DCDC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Australian designed, engineered, supported and manufactured
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13.5kg
\n
Dimensions: L 750mm (783 with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
Ready to go next level and upgrade your in-vehicle power options with a smart and efficient quality kit? This 12/110Ah slimline lithium battery comes equipped with integrated internal BMS, 40A dual stage DCDC charger and service port. The Cangoee Power Node provides up to 100A of continuous discharge, 100A rapid charge and can be arranged in parallel to deliver increased power.
\n
Features:
\n
\n
Internal 40A configurable DCDC charger
\n
Ignition trigger for smart alternators
\n
Internal 100A BMS
\n
Rapid 100A charge rate
\n
100A Discharge & 200A Surge
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multipin connector for DCDC, shunt configuration and cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
Australian designed, engineered, supported and manufactured
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13.5kg
\n
Dimensions: L 750mm (783 with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
"},{"id":6873622708266,"title":"Cangoee Lithium Iron Battery 220Ah Drawer Power Hub","handle":"cangoee-lithium-iron-battery-drawer-power-hub-pcu-with-40a-dcdc","description":"\n
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family. With its simple customer interface panel, the Cangoee Power Hub comes in a 110Ah configuration, providing up to 200A of continuous discharge, and can combine both DCDC and solar charge inputs for faster simultaneous charging.
\n
Features:
\n
\n
Integrated twelve channel electronic digital switching, circuit protection
\n
Configurable strategic power load shedding
\n
Plug and play CAN bus Cangoee battery monitoring and digital switching touch screen
\n
Plug and play CAN bus Cangoee tactile digital remote head switch panel
\n
Advanced compact all in one system within installation chassis
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 100-20 (220)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson, plug and play DCDC charging input - Blue Anderson, AC charging input - Black Anderson, Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
Australian designed, engineered, supported and manufactured
\n
\n
5 Year Warranty
\n
\n
\n\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 200A max cont. (400A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 32.9kg
\n
Dimensions: L 1060mm x H 268mm x D 112mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
\n
","published_at":"2022-11-14T15:32:22+10:00","created_at":"2022-08-24T09:10:48+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":["Battery"],"price":563849,"price_min":563849,"price_max":563849,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40360613969962,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CAN22040S2D","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cangoee Lithium Iron Battery 220Ah Drawer Power Hub","public_title":null,"options":["Default Title"],"price":563849,"weight":42900,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/cangoee-battery-cangoee-lithium-iron-battery-drawer-power-hub-pcu-with-40a-dcdc-29733132959786.png?v=1661298957"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-battery-cangoee-lithium-iron-battery-drawer-power-hub-pcu-with-40a-dcdc-29733132959786.png?v=1661298957","options":["Title"],"media":[{"alt":"Cangoee Battery Cangoee Lithium Iron Battery Drawer Power Hub (PCU) with 40A DCDC","id":22159679258666,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-battery-cangoee-lithium-iron-battery-drawer-power-hub-pcu-with-40a-dcdc-29733132959786.png?v=1661298957"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/cangoee-battery-cangoee-lithium-iron-battery-drawer-power-hub-pcu-with-40a-dcdc-29733132959786.png?v=1661298957","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\n
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family. With its simple customer interface panel, the Cangoee Power Hub comes in a 110Ah configuration, providing up to 200A of continuous discharge, and can combine both DCDC and solar charge inputs for faster simultaneous charging.
\n
Features:
\n
\n
Integrated twelve channel electronic digital switching, circuit protection
\n
Configurable strategic power load shedding
\n
Plug and play CAN bus Cangoee battery monitoring and digital switching touch screen
\n
Plug and play CAN bus Cangoee tactile digital remote head switch panel
\n
Advanced compact all in one system within installation chassis
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 100-20 (220)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson, plug and play DCDC charging input - Blue Anderson, AC charging input - Black Anderson, Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
Australian designed, engineered, supported and manufactured
\n
\n
5 Year Warranty
\n
\n
\n\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 200A max cont. (400A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 32.9kg
\n
Dimensions: L 1060mm x H 268mm x D 112mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
\n
"},{"id":6873667960874,"title":"Cangoee 110Ah Lithium Iron Battery Drawer Power Hub","handle":"110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc","description":"
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family. With its simple customer interface panel, the Cangoee Power Hub comes in a 110Ah configuration, providing up to 200A of continuous discharge, and can combine both DCDC and solar charge inputs for faster simultaneous charging.
\n
Features:
\n
\n
Integrated twelve channel electronic digital switching and circuit protection
\n
Configurable strategic power load shedding
\n
Plug and play CAN bus Cangoee battery monitoring and digital switching touch screen
\n
Plug and play CAN bus Cangoee tactile digital remote head switch panel
\n
Advanced compact all in one system within installation chassis
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 75-15 (110)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson, plug and play DCDC charging input - Blue Anderson, AC charging input - Black Anderson, Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
Australian designed, engineered, supported and manufactured
\n
\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 200A max cont. (400A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 18.5kg
\n
Dimensions: L 1060mm x H 268mm x D 112mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
","published_at":"2022-11-14T15:13:55+10:00","created_at":"2022-08-24T11:56:19+10:00","vendor":"Cangoee","type":"Lithium Battery","tags":["Battery"],"price":379131,"price_min":379131,"price_max":379131,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40360646443050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CAN11040S1D","requires_shipping":true,"taxable":true,"featured_image":{"id":29733435211818,"product_id":6873667960874,"position":2,"created_at":"2022-08-24T12:02:00+10:00","updated_at":"2022-08-24T12:02:00+10:00","alt":"Accelerate Off-Grid Touring 110Ah Lithium Iron Battery Drawer Power Hub (PCU OPtional) with 40A DCDC","width":940,"height":788,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430788138.png?v=1661306520","variant_ids":[40360646443050]},"available":true,"name":"Cangoee 110Ah Lithium Iron Battery Drawer Power Hub","public_title":null,"options":["Default Title"],"price":379131,"weight":19500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","featured_media":{"alt":"Accelerate Off-Grid Touring 110Ah Lithium Iron Battery Drawer Power Hub (PCU OPtional) with 40A DCDC","id":22159973089322,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430788138.png?v=1661306520"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430722602.png?v=1661306517","//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430788138.png?v=1661306520"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430722602.png?v=1661306517","options":["Title"],"media":[{"alt":"Accelerate Off-Grid Touring 110Ah Lithium Iron Battery Drawer Power Hub (PCU OPtional) with 40A DCDC","id":22159973023786,"position":1,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430722602.png?v=1661306517"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430722602.png?v=1661306517","width":940},{"alt":"Accelerate Off-Grid Touring 110Ah Lithium Iron Battery Drawer Power Hub (PCU OPtional) with 40A DCDC","id":22159973089322,"position":2,"preview_image":{"aspect_ratio":1.193,"height":788,"width":940,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430788138.png?v=1661306520"},"aspect_ratio":1.193,"height":788,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-110ah-lithium-iron-battery-drawer-power-hub-pcu-optional-with-40a-dcdc-29733430788138.png?v=1661306520","width":940}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family. With its simple customer interface panel, the Cangoee Power Hub comes in a 110Ah configuration, providing up to 200A of continuous discharge, and can combine both DCDC and solar charge inputs for faster simultaneous charging.
\n
Features:
\n
\n
Integrated twelve channel electronic digital switching and circuit protection
\n
Configurable strategic power load shedding
\n
Plug and play CAN bus Cangoee battery monitoring and digital switching touch screen
\n
Plug and play CAN bus Cangoee tactile digital remote head switch panel
\n
Advanced compact all in one system within installation chassis
\n
Engineer Verified System
\n
Easy to navigate user interface panel
\n
Smart Shunt with Bluetooth connectivity
\n
Smart MPPT Solar Controller 75-15 (110)
\n
Dual level battery protect
\n
Circuit isolation switch for safety
\n
Plug and play raw unregulated solar input - Red Anderson, plug and play DCDC charging input - Blue Anderson, AC charging input - Black Anderson, Parallel Grey Anderson 12V output
\n
Inverter suitable power supply stud
\n
Common earth stud
\n
Australian designed, engineered, supported and manufactured
\n
\n
5 Year Warranty
\n
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 200A max cont. (400A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 18.5kg
\n
Dimensions: L 1060mm x H 268mm x D 112mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
The Cangoee Power Bank is a 12V 110Ah Slimline Lithium Power Bank with an internal BMS, inverter suitable battery terminals, and multipin service port. The unique Cangoee adaptable power solution is constructed using the latest high-quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminum case allowing a staged approach to your vehicle’s power needs.
\n
Features:
\n
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multipin connector for cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
\n Australian designed, engineered, supported and manufactured.\n
\n
5 Year Warranty
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13kg
\n
Dimensions: L 750mm (783mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
The Cangoee Power Bank is a 12V 110Ah Slimline Lithium Power Bank with an internal BMS, inverter suitable battery terminals, and multipin service port. The unique Cangoee adaptable power solution is constructed using the latest high-quality prismatic lithium iron phosphate cells. The smart design utilises a common form factor in a robust aluminum case allowing a staged approach to your vehicle’s power needs.
\n
Features:
\n
\n
Internal 100A BMS
\n
Twice the capacity of AGM/ SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection
\n
MCP multipin connector for cell monitoring
\n
Inverter suitable power supply stud
\n
300A rated battery connectors
\n
\n Australian designed, engineered, supported and manufactured.\n
\n
5 Year Warranty
\n
\n
Specifications:
\n
\n
Nominal Voltage: 12.8V
\n
Charge Voltage: 14.6V Max
\n
Charge Current: 100A
\n
Discharge current: 100A max cont. (200A surge)
\n
Operating Temperature: 0-45°C
\n
Weight: 13kg
\n
Dimensions: L 750mm (783mm with stud) x H 264mm x D 50mm
\n
\n
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
\n
Features & Benefits
\n
\n
\nAustralian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.\n
\n
\n
\n
\nDual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\nPouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\nCharge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\nHeat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\nJump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
\n
Features & Benefits
\n
\n
\nAustralian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.\n
\n
\n
\n
\nDual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\nPouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\nCharge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\nHeat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\nJump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
\n
Features & Benefits
\n
\n
\nAustralian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.\n
\n
\n
\n
\nDual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\nPouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\nCharge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\nHeat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\nJump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
The Invicta Hybrid Starter battery is a dual-purpose starter lithium and deep-cycle solution that can withstand high-heat environments due to its heat-resistant technology. Utilising premium A123 pouch cells used by Mercedes and BMW, it can output over 1400CCA depending on the product. As an added feature, a backup Jump Start function has been added so users can be confident that they will be able to run their 12V accessories without sacrificing starting ability.
\n
These particular pouch cells have been specifically selected due to their inherent ability to be discharged and charged at a high rate. This gives installers flexibility as it can be charged directly from the applications alternator. The SNLMAX is so powerful it can even power a 4WD winch.
\n
\n
Features & Benefits
\n
\n
\nAustralian owned Invicta is Australian owned and backed by over 25 years of knowledge. The Invicta Hybrid Starter range has also undergone over 2 years of pre-release development by our Australian technical team.\n
\n
\n
\n
\nDual - BMS A specially engineered Dual BMS allows the battery to discharge and charge at an even high rate. This allows the battery to be used in winching applications
\n
\n
\nPouch cell construction The pouch cell construction is specifically used due to its inherent starting abilities which allows for a high-rate of discharge and flexibility when charging.
\n
\n
\nCharge directly from the alternator The cell design and BMS allow for the varying types of charge delivered by alternators.
\n
\n
\nHeat resistant technology Utilises a specially designed thermal protection layer to reduce the impact of heat on the internals.
\n
\n
\nJump start feature A small percentage of capacity is reserved automatically for jump start if you drain the battery. Easily engage this feature with the push of a button.\n
\n
\n
3 Year full replacement warranty The Invicta Hybrid Starter range has a 3 year full replacement warranty backed by SPB.
\n\n\n"},{"id":1932236587050,"title":"INVICTA 125AH LITHIUM BATTERY 12V - 7 Year Warranty","handle":"bmpro-12v-125ah-sentry-battery-lithium-deep-cycle-battery","description":"
12V LITHIUM BATTERY BEST CHOICE FOR OFF-GRID TRAVEL
\n
The Invicta Battery SNL 12V 125S has been extensively tested with BMPRO range of power management systems and has been proven to partner with them more effectively than other batteries tested.
\n
Replace your old lead acid battery with 12V lithium one. BMPRO Sentry model boasts great utilisation of available capacity through increased Depth of Discharge (DOD), long life cycle and fast charging.
\n
Compared to other lithium technologies, LiFePO4 has greater tolerance to high temperatures, overcharging and short circuit. The battery includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery.
\n
IEC Certification on both the BMS and Cells of Sentry Battery further gives the users peace of mind, warranting high quality and safety of lithium batteries.
\n
Please note this is the NON bluetooth version
\n
BENEFITS:
\n
\n
Large number of cycles >2000 (100% DoD) means lower cost of ownership
\n
Safe and stable chemistry & Integrated BMS provide the highest degree of safety
\n
Greater capacity utilisation – 60% more than SLA gives longer runtime compared with equivalent SLA
\n
High energy density (less than half of the weight of SLA) lowers total weight of application
\n
Fast recharge means the battery is charged and ready to be used sooner
\n
Flat Discharge Curve gives longer run time & more efficient use of capacity
\n
Extremely low self-discharge rate allows to let the battery sit unused for longer periods of time
\n
UL1642 at cell level and IEC 62619:2017 at the complete battery level certification (lithium battery safety testing for household, industrial and commercial batteries)
\n
\n
SPECIFICATIONS
\n
Nominal Voltage12.8V Nominal Capacity (25℃, 0.33C)125Ah Terminal M8 Length (mm)318 ± 2 Width (mm)165 ± 2 Height (mm)215 ± 2 Weight14.8 kg Max Charge Voltage14.6± 0.1V Standby13.8 ± 0.1V Cut off Voltage10V Max. Discharge Current (30 mins)95A Max. Pulse Discharge Current (3 Sec)350A Max. Charge Current80A Recommended Current Charge ≤50A Cycle Life (100% DoD)≥ 2000 Operating Temp – Charge0 — 50°C Operating Temp – Discharge-20 – 55°C Short Circuit Release30 sec Max. Series / Parallel Configuration4P or 4S
12V LITHIUM BATTERY BEST CHOICE FOR OFF-GRID TRAVEL
\n
The Invicta Battery SNL 12V 125S has been extensively tested with BMPRO range of power management systems and has been proven to partner with them more effectively than other batteries tested.
\n
Replace your old lead acid battery with 12V lithium one. BMPRO Sentry model boasts great utilisation of available capacity through increased Depth of Discharge (DOD), long life cycle and fast charging.
\n
Compared to other lithium technologies, LiFePO4 has greater tolerance to high temperatures, overcharging and short circuit. The battery includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery.
\n
IEC Certification on both the BMS and Cells of Sentry Battery further gives the users peace of mind, warranting high quality and safety of lithium batteries.
\n
Please note this is the NON bluetooth version
\n
BENEFITS:
\n
\n
Large number of cycles >2000 (100% DoD) means lower cost of ownership
\n
Safe and stable chemistry & Integrated BMS provide the highest degree of safety
\n
Greater capacity utilisation – 60% more than SLA gives longer runtime compared with equivalent SLA
\n
High energy density (less than half of the weight of SLA) lowers total weight of application
\n
Fast recharge means the battery is charged and ready to be used sooner
\n
Flat Discharge Curve gives longer run time & more efficient use of capacity
\n
Extremely low self-discharge rate allows to let the battery sit unused for longer periods of time
\n
UL1642 at cell level and IEC 62619:2017 at the complete battery level certification (lithium battery safety testing for household, industrial and commercial batteries)
\n
\n
SPECIFICATIONS
\n
Nominal Voltage12.8V Nominal Capacity (25℃, 0.33C)125Ah Terminal M8 Length (mm)318 ± 2 Width (mm)165 ± 2 Height (mm)215 ± 2 Weight14.8 kg Max Charge Voltage14.6± 0.1V Standby13.8 ± 0.1V Cut off Voltage10V Max. Discharge Current (30 mins)95A Max. Pulse Discharge Current (3 Sec)350A Max. Charge Current80A Recommended Current Charge ≤50A Cycle Life (100% DoD)≥ 2000 Operating Temp – Charge0 — 50°C Operating Temp – Discharge-20 – 55°C Short Circuit Release30 sec Max. Series / Parallel Configuration4P or 4S
"}],"collections":[23718589,270506459178,261904400426],"taxes_included":true}
Skip to content
Cangoee Power Hub 110Ah Lithium battery with 40A DCDC Charger and Smart controller/Shunt
Original price$0
Original price
$2,688.12
-
Original price
$2,688.12
Original price
Current price$2,688.12
$2,688.12
-
$2,688.12
Current price
$2,688.12
| /
The Cangoee Mini Hub offers a mid-range solution with integrated 40A DCDC, MPPT 75/15 Smart Solar Controller and 500A Smart Shunt with Bluetooth connectivity. This is the perfect solution for tighter spaces, mid-range budgets whilst offering a quality standalone energy and power solution.
Constructed in Australia using the latest high quality prismatic lithium iron phosphate cells, the smart, sleek design comes in a robust aluminium case, and is the ‘heavy duty’ force in the Cangoee Power Family.
Features:
Advanced compact all in one system within installation chassis
Slim form factor in multiple configurations designed and fully assembled in Australia
Engineer Verified System
Easy to navigate user interface panel
Smart Shunt with Bluetooth connectivity
Smart MPPT Solar Controller 75-15 (110) or 100-20 (220)
Dual level battery protect
Circuit isolation switch for safety
Plug and play raw unregulated solar input - Red Anderson
Plug and play DCDC charging input - Blue Anderson
AC charging input - Black Anderson
Parallel Grey Anderson 12V output
Inverter suitable power supply stud
Common earth stud
5 Year Warranty
Specifications:
Nominal Voltage: 12.8V
Charge Voltage: 14.6V Max
Charge Current: 100A
Discharge current: 100A max cont. (200A surge)
Operating Temperature: 0-45°C
Weight: 19kg
Dimensions: L 750mm (670mm with stud) x H 264mm x D 50mm
Please note that not all items are always kept in stock, if you require an item urgently please contact the team on (07) 5479 6652.
Please allow 2 business for estimated dispatch time. Shipping can take 1-2 weeks depending on your shipping address and postal service. Please select express post if product is required within 5 business days.
If you need your item within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.