Behind-Seat Slimline Battery System: Ford Ranger & Mazda BT50 – Driver’s Side Sockets
\n
Our complete dual battery system is designed to fit behind the rear seat, making it the ultimate solution for Utes and Dual Cab vehicles that can’t accommodate a battery under the bonnet or don’t want to sacrifice tray space with a battery box.
\n
Vehicle Compatibility
\n
This DIY kit has been tested on:
\n
\n
\nFord Ranger – PX MkI, MkII & MkIII (2013–2022)
\n
\nMazda BT50 – (2013–2020)
\n
\n
If your vehicle isn’t listed above, please check the required dimensions or contact us before purchasing.
\n
System Dimensions
\n
\n
\nHeight: 20cm
\n
\nLength: 75cm
\n
\nWidth: 14.3cm
\n
\nInternal battery compartment: 55.3cm (L) x 12.8cm (W)
\n
\n
Want us to install it for you? Contact us at 07 5479 6652 for a supplied and fitted quote.
\n\n
Slimline Battery Options
\n
1. No Battery
\n
Note: The DC charger will be programmed for lithium unless specified otherwise.
\nLithium Battery Shipping: Kits including lithium batteries are shipped via TNT due to dangerous goods regulations. TNT cannot provide an estimated delivery time.
\n
\nBuild Time: We generally allow 1–2 weeks for assembly, with most kits built within a week. If delays occur, we’ll contact you.
\n
\nShipping Time: Once dispatched, delivery typically takes 1–2 weeks, depending on your location.
The dimensions for all socket box configurations are 195mm L x 110 mm H x 60mm D.
\n
Dual Sockets:
\n
\n
Option 1 - 2x 12V Sockets
\n
Option 2 - 1x 12V Socket & 1x Dual USB
\n
Option 3 - 1x 12V Socket & 1x Voltmeter
\n
\n
Socket Box:
\n
\n
Option 1 - 1x Anderson Plug, 2x 12V Sockets, 1x Voltmeter, 1x Dual USB
\n
Option 2 - 1x Anderson Plug, 1x 12V Socket, 1x Engel Style Socket, 1x Voltmeter, 1x Dual USB\n
\n
Option 3 - 1x Anderson Plug, 1x 12V Socket, 1x Merit Style Socket, 1x Voltmeter, 1x Dual USB
\n
Option 4 - 2x Anderson Plug, 2x 12V Socket, 1x Voltmeter, 1x Dual USB
\n
Option 5 - 1x Anderson Plug, 1x Red Anderson Plug for Solar Input, 2x 12V Socket, 1x Voltmeter, 1x Dual USB
\n
\n
\n
\n
Each kit comes with a Base Kit that includes:
\n
\n
Installation Instructions
\n
Slimline Battery Bracket
\n
\nSocket Panel - 2 Options with 3 Variations Each Available \n
\n
\nSlimline Battery - Lithium Only\n
\n
\nDC-DC Charger - 2 Charger Options Available \n
\n
6 Way Fuse Box
\n
3x Grey Anderson Plugs
\n
1x Red Anderson Plug
\n
Twin Midi Fuse Holder
\n
60A Midi Fuse
\n
250A Single Midi Fuse Holder
\n
7m x 8 B&S Cable
\n
1m x 6 B&S Cable
\n
5m x 6mm Twin Core Cable
\n
5m x 9.9mm Split Convoluted Tubing
\n
Thunder Tie Down Straps
\n
8mm Cable Lug
\n
\n
Options Available:
\n
Tray:
\n
Standard - Raw Aluminium
\n
Socket Panel:
\n
Dual Sockets:
\n
\n
Option 1 - 2x 12V Sockets
\n
Option 2 - 1x 12V Socket & 1x Dual USB
\n
Option 3 - 1x 12V Socket & 1x Voltmeter
\n
\n
Socket Box:
\n
\n
Option 1 - 1x Anderson Plug, 2x 12V Sockets, 1x Voltmeter, 1x Dual USB
\n
Option 2 - 1x Anderson Plug, 1x 12V Socket, 1x Engel Style Socket, 1x Voltmeter, 1x Dual USB\n
\n
Option 3 - 1x Anderson Plug, 1x 12V Socket, 1x Merit Style Socket, 1x Voltmeter, 1x Dual USB
\n
Option 4 - 2x Anderson Plug, 2x 12V Socket, 1x Voltmeter, 1x Dual USB
\n
Option 5 - 1x Anderson Plug, 1x Red Anderson Plug for Solar Input, 2x 12V Socket, 1x Voltmeter, 1x Dual USB
\n
\n
\n
\nHere are 4 more great reasons to buy from us:\n
\n
\n\n
\n
\n
\n
\n
\n \n
\n
Returns are easy, simply contact us within 30 days for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
\n
\n
\n
\n
\n
\n
\n
\n \n
\n
We are 4 wheel drive and camping specalists, we live and breath this and we bring that passion and expertise to everything we do.
\n
\n
\n
\n
\n
\n
\n
\n \n
\n
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
\n
\n
\n
\n
\n
\n
\n
\n \n
\nOrdering from us is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
\n
\n\n
\n
\n
\n
\n
\n \n
\n
\n
Postage Time Frames:
\n
As each kit is custom built it may take us some time to process and dispatch your order.
\n
\n
2 weeks estimateddispatch time
\n
Shipping can take 1-2 weeks depending on your location and postal service
\n
\n
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.
Our Custom Slimline Battery Tray is now available to purchase on it's own
\n
Used in our Behind Seat Dual Battery Kit (see here) to fit behind the seat of
\n
\n
\nFord Ranger- PX MkI, MkII & MkIII - 2013 to 2022 ( Does not suit Next Gen)
\n
\nMazda BT50- 2013 to 2020 pre November
\n
\n
With a Invicta or Enerdrive Lithium 100ah Lithium Battery
\n
Made from Raw Aluminium
\n
Mounting provisions for Redarc BCDC1225D, BCDC1240D or BCDC1250D
\n
External dimensions 75cm Long x 14.3cm Wide x 20cm High
\n
Internal dimensions for battery: 55.3cm x 12.8cm
"},{"id":7071058526250,"title":"GMF 4x4 Ford Everest, Ranger and Raptor 2022+ Bonnet Aerial UHF Antenna Bracket BB-035P","handle":"ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p","description":"\n
GMF4x4bonnet antenna brackets are designed specifically for the Ford Everest, Ranger and Raptor 2022+.
\n
* Does NOT fit 2015-2021 - Everest *
\n
\n* Does NOT fit PX series Ranger *
\n
Our unique brackets bolt directly to the Passenger sidebonnet hinge.
\n
Our brackets are proudly made in Australia.
\n
These bracket do not affect the opening of the bonnet or the operation of the window wipers. They are pressed 5mm steel powder coated black Strongest on the market!GMF4x4 is proudly the creator of the bonnet hinge UHF mount. Don't support a copy, get the real thing.
\n
Note: All 4wd UHF Antennas will fit perfectly on our brackets.
\n
*Disclaimer: GMF4x4 have many Designs, Patents and Trademarks registered in Australia and internationally.
","published_at":"2024-02-08T10:26:58+10:00","created_at":"2024-02-08T10:26:58+10:00","vendor":"GMF","type":"GMF Bonnet Brackets","tags":["4WD Accessories"],"price":7500,"price_min":7500,"price_max":7500,"available":true,"price_varies":false,"compare_at_price":7500,"compare_at_price_min":7500,"compare_at_price_max":7500,"compare_at_price_varies":false,"variants":[{"id":40994054996010,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BB-035P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GMF 4x4 Ford Everest, Ranger and Raptor 2022+ Bonnet Aerial UHF Antenna Bracket BB-035P","public_title":null,"options":["Default Title"],"price":7500,"weight":100,"compare_at_price":7500,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801496106.png?v=1707352295","//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801528874.webp?v=1707352301","//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801266730.webp?v=1707352298","//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801725482.webp?v=1707352303"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801496106.png?v=1707352295","options":["Title"],"media":[{"alt":"Accelerate Off-Grid Touring Ford Everest, Ranger and Raptor 2022+ Bonnet Aerial UHF Antenna Bracket BB-035P","id":23601890033706,"position":1,"preview_image":{"aspect_ratio":1,"height":1080,"width":1080,"src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801496106.png?v=1707352295"},"aspect_ratio":1,"height":1080,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801496106.png?v=1707352295","width":1080},{"alt":"Accelerate Off-Grid Touring Ford Everest, Ranger and Raptor 2022+ Bonnet Aerial UHF Antenna Bracket BB-035P","id":23601890557994,"position":2,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801528874.webp?v=1707352301"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801528874.webp?v=1707352301","width":500},{"alt":"Accelerate Off-Grid Touring Ford Everest, Ranger and Raptor 2022+ Bonnet Aerial UHF Antenna Bracket BB-035P","id":23601890361386,"position":3,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801266730.webp?v=1707352298"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801266730.webp?v=1707352298","width":500},{"alt":"Accelerate Off-Grid Touring Ford Everest, Ranger and Raptor 2022+ Bonnet Aerial UHF Antenna Bracket BB-035P","id":23601890754602,"position":4,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801725482.webp?v=1707352303"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-ford-everest-ranger-and-raptor-2022-bonnet-aerial-uhf-antenna-bracket-bb-035p-31146801725482.webp?v=1707352303","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\n
GMF4x4bonnet antenna brackets are designed specifically for the Ford Everest, Ranger and Raptor 2022+.
\n
* Does NOT fit 2015-2021 - Everest *
\n
\n* Does NOT fit PX series Ranger *
\n
Our unique brackets bolt directly to the Passenger sidebonnet hinge.
\n
Our brackets are proudly made in Australia.
\n
These bracket do not affect the opening of the bonnet or the operation of the window wipers. They are pressed 5mm steel powder coated black Strongest on the market!GMF4x4 is proudly the creator of the bonnet hinge UHF mount. Don't support a copy, get the real thing.
\n
Note: All 4wd UHF Antennas will fit perfectly on our brackets.
\n
*Disclaimer: GMF4x4 have many Designs, Patents and Trademarks registered in Australia and internationally.
With so many connections required between a car and caravan these days, it can be difficult to mount everything neatly and securely. Our trailer bracket has been specifically designed for the Next-Gen Ranger and solves this problem. It is made from 3mm thick Stainless Steel and its powder coated black so that it looks the part as well. Oh and its locally made right here in Australia.
\n
The bracket can support the following:-
\n
\n
7 or 12 pin Flat Trailer Connection
\n
Up to 2 x 50 AMP Anderson Plugs stacked (Screws and Anderson Covers provided for 2 x Anderson Plugs only)
\n
Supports 1 x 50 AMP Trailer Vision Anderson Plug Mounting
\n
2 x Airbag Valves
\n
1 x Trailer Woza Socket*
\n
\n
Note – Compatible with Safety Dave, Sphere, Polaris and Aopulo Caravan Camera Sockets
With so many connections required between a car and caravan these days, it can be difficult to mount everything neatly and securely. Our trailer bracket has been specifically designed for the Next-Gen Ranger and solves this problem. It is made from 3mm thick Stainless Steel and its powder coated black so that it looks the part as well. Oh and its locally made right here in Australia.
\n
The bracket can support the following:-
\n
\n
7 or 12 pin Flat Trailer Connection
\n
Up to 2 x 50 AMP Anderson Plugs stacked (Screws and Anderson Covers provided for 2 x Anderson Plugs only)
\n
Supports 1 x 50 AMP Trailer Vision Anderson Plug Mounting
\n
2 x Airbag Valves
\n
1 x Trailer Woza Socket*
\n
\n
Note – Compatible with Safety Dave, Sphere, Polaris and Aopulo Caravan Camera Sockets
\n
Note - This is the bracket only
"},{"id":6923444551722,"title":"NextGen Ford Ranger Behind Seat DIY Dual Battery Kit","handle":"ford-nextgen-ranger-diy-behind-seat-dual-battery-kit","description":"
NextGen Ford Ranger Behind Seat DIY Dual Battery Kit \n
\n
\n
We have engineered a complete dual battery system that can fit behind the rear seat of your Ford NextGen Ranger \n
\n
Installation utilising OE mounting points, this DIY kit has been tested on the following vehicles :
This is the ultimate solution for Utes and Dual Cab vehicles that can’t fit a battery under the bonnet or those who don't want a battery box taking up valuable tray space.
\n
Total Dimensions:
\n
\n
Height: 41.5cm
\n
Length: 67cm
\n
Depth: 8.5cm
\n
\n
What's included
\n
\n
Cangoee 110Ah Lithium Battery
\n
In-Built 20amp DC2DC Charger
\n
Victron Energy Smartshunt 500A/50mV \n
\n
Victron Energy Smart Solar Controller 75/15
\n
6 Way Fuse Box \n
\n
Vehicle Input Harness
\n
Instructions
\n
\n
Battery
\n
Cangoee Lithium Battery 12V 110Ah Short Power Bank
\n
\n
Capacity:110Ah robust M6 prismatic lithium cells.
\n
Internal BMS protection manages both over current and low voltage disconnect
\n
5 Year Warranty
\n
Internal 100A BMS \n
\n
Rapid 100A charge rate
\n
Discharge Current: 100A max cont. 200A surge
\n
Twice the capacity of AGM / SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection.
\n
Inverter suitable power supply stud \n
\n
300A rated battery connectors
\n
Weight: 13kg
\n
Size L: 670mm. H: 264mm. D: 50mm
\n
Life at 80% DOD: 2000 cycles
\n
Life at 50% DOD: 5000 cycles
\n
Operating Temp: 0-45degrees
\n
\n
\n
\n
\n
\n
\n
\n
\n\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
SubWoofer Replacement
\n
\n
\n
\n
\n
\n
\n
\n
If your NextGen Ranger is optioned with a SubWoofer behind the rear seat. We've custom made a plate and created instructions so you can relocate it to under the drivers side rear seat, please select this option.
\n
PLEASE NOTE:
\n
You will need to remove your jack to fit this kit - we do not have a new jack mounting point. The jack will physically fit behind the seat with the kit - just no mounting point.
\n
Please Note:
\n
If you have purchased a kit that includes a lithium battery, please be aware that it will be shipped via TNT as it is classified as dangerous goods. TNT is unable to provide an estimated time of arrival (ETA) for packages containing dangerous goods.
\n
We generally advise a 1–2 week build time on these kits (they are usually built within the week). If we anticipate a longer build time for your order, we will contact you directly to keep you updated. Once shipped, delivery typically takes 1–2 weeks, depending on your location.
\n
This timeline accounts for the additional processing required for dangerous goods shipments at each depot or collection point to comply with strict safety regulations
\n
\n
\n
\n
\n
","published_at":"2023-03-01T11:26:00+10:00","created_at":"2023-02-28T19:58:11+10:00","vendor":"Accelerate Off-Grid Touring","type":"DIY Kits","tags":["4WD Accessories","Battery","Custom Built","Dual Battery System","TRADE KIT CANGOEE"],"price":357500,"price_min":357500,"price_max":382500,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40505853345834,"title":"No","option1":"No","option2":null,"option3":null,"sku":"NXTGENRANGKIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"NextGen Ford Ranger Behind Seat DIY Dual Battery Kit - No","public_title":"No","options":["No"],"price":357500,"weight":25000,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40505853313066,"title":"Yes Subwoofer","option1":"Yes Subwoofer","option2":null,"option3":null,"sku":"NXTGENRANGKITSUB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"NextGen Ford Ranger Behind Seat DIY Dual Battery Kit - Yes Subwoofer","public_title":"Yes Subwoofer","options":["Yes Subwoofer"],"price":382500,"weight":25000,"compare_at_price":null,"inventory_quantity":-8,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/files/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-31147227054122.png?v=1707356796","//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30486433759274.png?v=1707356602","//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30486433792042.png?v=1707356602","//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30488321261610.heic?v=1707356602","//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-diy-kits-nextgen-ford-ranger-behind-seat-diy-dual-battery-kit-1150016771.png?v=1742486830"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-31147227054122.png?v=1707356796","options":["SubWoofer Relocation"],"media":[{"alt":"Accelerate 4wd and Caravan Electrics DIY Kits Ford NextGen Ranger DIY Behind Seat Dual Battery Kit","id":23602322047018,"position":1,"preview_image":{"aspect_ratio":1.778,"height":877,"width":1559,"src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-31147227054122.png?v=1707356796"},"aspect_ratio":1.778,"height":877,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-31147227054122.png?v=1707356796","width":1559},{"alt":"Accelerate 4wd and Caravan Electrics DIY Kits Ford NextGen Ranger DIY Behind Seat Dual Battery Kit","id":22922562502698,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30486433759274.png?v=1707356602"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30486433759274.png?v=1707356602","width":2048},{"alt":"Accelerate 4wd and Caravan Electrics DIY Kits Ford NextGen Ranger DIY Behind Seat Dual Battery Kit","id":22922562469930,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30486433792042.png?v=1707356602"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30486433792042.png?v=1707356602","width":2048},{"alt":"Accelerate 4wd and Caravan Electrics DIY Kits Ford NextGen Ranger DIY Behind Seat Dual Battery Kit","id":22924470026282,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1327,"width":1991,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30488321261610.heic?v=1707356602"},"aspect_ratio":1.5,"height":1327,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-4wd-and-caravan-electrics-diy-kits-ford-nextgen-ranger-diy-behind-seat-dual-battery-kit-30488321261610.heic?v=1707356602","width":1991},{"alt":"Accelerate Off-Grid Touring DIY Kits NextGen Ford Ranger Behind Seat DIY Dual Battery Kit","id":25646817312810,"position":5,"preview_image":{"aspect_ratio":1,"height":1080,"width":1080,"src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-diy-kits-nextgen-ford-ranger-behind-seat-diy-dual-battery-kit-1150016771.png?v=1742486830"},"aspect_ratio":1,"height":1080,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/files/accelerate-off-grid-touring-diy-kits-nextgen-ford-ranger-behind-seat-diy-dual-battery-kit-1150016771.png?v=1742486830","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
NextGen Ford Ranger Behind Seat DIY Dual Battery Kit \n
\n
\n
We have engineered a complete dual battery system that can fit behind the rear seat of your Ford NextGen Ranger \n
\n
Installation utilising OE mounting points, this DIY kit has been tested on the following vehicles :
This is the ultimate solution for Utes and Dual Cab vehicles that can’t fit a battery under the bonnet or those who don't want a battery box taking up valuable tray space.
\n
Total Dimensions:
\n
\n
Height: 41.5cm
\n
Length: 67cm
\n
Depth: 8.5cm
\n
\n
What's included
\n
\n
Cangoee 110Ah Lithium Battery
\n
In-Built 20amp DC2DC Charger
\n
Victron Energy Smartshunt 500A/50mV \n
\n
Victron Energy Smart Solar Controller 75/15
\n
6 Way Fuse Box \n
\n
Vehicle Input Harness
\n
Instructions
\n
\n
Battery
\n
Cangoee Lithium Battery 12V 110Ah Short Power Bank
\n
\n
Capacity:110Ah robust M6 prismatic lithium cells.
\n
Internal BMS protection manages both over current and low voltage disconnect
\n
5 Year Warranty
\n
Internal 100A BMS \n
\n
Rapid 100A charge rate
\n
Discharge Current: 100A max cont. 200A surge
\n
Twice the capacity of AGM / SLA batteries 50% lighter than other systems
\n
Slim form factor in multiple configurations designed for parallel connection.
\n
Inverter suitable power supply stud \n
\n
300A rated battery connectors
\n
Weight: 13kg
\n
Size L: 670mm. H: 264mm. D: 50mm
\n
Life at 80% DOD: 2000 cycles
\n
Life at 50% DOD: 5000 cycles
\n
Operating Temp: 0-45degrees
\n
\n
\n
\n
\n
\n
\n
\n
\n\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
SubWoofer Replacement
\n
\n
\n
\n
\n
\n
\n
\n
If your NextGen Ranger is optioned with a SubWoofer behind the rear seat. We've custom made a plate and created instructions so you can relocate it to under the drivers side rear seat, please select this option.
\n
PLEASE NOTE:
\n
You will need to remove your jack to fit this kit - we do not have a new jack mounting point. The jack will physically fit behind the seat with the kit - just no mounting point.
\n
Please Note:
\n
If you have purchased a kit that includes a lithium battery, please be aware that it will be shipped via TNT as it is classified as dangerous goods. TNT is unable to provide an estimated time of arrival (ETA) for packages containing dangerous goods.
\n
We generally advise a 1–2 week build time on these kits (they are usually built within the week). If we anticipate a longer build time for your order, we will contact you directly to keep you updated. Once shipped, delivery typically takes 1–2 weeks, depending on your location.
\n
This timeline accounts for the additional processing required for dangerous goods shipments at each depot or collection point to comply with strict safety regulations
\n
\n
\n
\n
\n
"},{"id":7553986232362,"title":"NextGen Ford Ranger SubWoofer Relocation Kit","handle":"nextgen-ford-ranger-subwoofer-relocation-kit","description":"
Next-Gen Ranger Subwoofer Relocation Kit
\n
Relocate Your Subwoofer for More Space & Better Sound!
\n
If your Next-Gen Ford Ranger is equipped with a factory subwoofer behind the rear seat, this Subwoofer Relocation Kit allows you to move it under the driver's side rear seat for a cleaner setup and improved usability.
\n
This kit includes: ✔ Custom Alloy Mounting Plate (425mm x 330mm x 3mm) ✔ Pre-cut Extension Wiring Harness for easy installation ✔ All Necessary Hardware & Fixings ✔ Step-by-Step Instructions for a smooth relocation process
\n
Installation Summary:
\n
\n
Remove the under-seat storage box and drill three holes for mounting.
\n
Modify the wiring harness and extend it under the carpet to the new location.
\n
Secure the subwoofer onto the custom plate and fit it into the storage box.
\n
Reassemble and apply foam tape if needed to prevent rattles.
Relocate Your Subwoofer for More Space & Better Sound!
\n
If your Next-Gen Ford Ranger is equipped with a factory subwoofer behind the rear seat, this Subwoofer Relocation Kit allows you to move it under the driver's side rear seat for a cleaner setup and improved usability.
\n
This kit includes: ✔ Custom Alloy Mounting Plate (425mm x 330mm x 3mm) ✔ Pre-cut Extension Wiring Harness for easy installation ✔ All Necessary Hardware & Fixings ✔ Step-by-Step Instructions for a smooth relocation process
\n
Installation Summary:
\n
\n
Remove the under-seat storage box and drill three holes for mounting.
\n
Modify the wiring harness and extend it under the carpet to the new location.
\n
Secure the subwoofer onto the custom plate and fit it into the storage box.
\n
Reassemble and apply foam tape if needed to prevent rattles.
Get yourself set up with the award-winning Redarc Tow-Pro Elite!
\n
Easily swap between automatic mode for highway driving or user controlled for off-road driving. The new user interface features a new control knob and better gain level visibility along with a simpler installation process.
\n
All this is tied up in a nice bundle for you!
\n
Features
\n
\n
Plug and play connectivity
\n
Includes all hardware for Tow-Pro Elite installation
\n
Active calibration
\n
AL-KO ESC and Dexter DSC compliant
\n
Smooth trailer braking response
\n
Automatic and user-controlled modes
\n
Electric/hydraulic operation
\n
Meets ADR21 safety standards
\n
Suitable for all vehicles
\n
Smaller remote installation depth, width and height
\n
Single drill installation
\n
Better gain level visibility
\n
Automotive grade connectors
\n
\n
\n
This includes:
\n
- A Tow-Pro Elite 12V (EBRH-ACCV3) electric trailer brake controller, featuring both user-controlled and proportional braking modes
\n
- Wiring Kit to suit your vehicle required for self-installation
\n
- A Tow-Pro Elite switch insert to allow the remote head to be installed into an existing switch panel in a vehicle dashboard
\n
This product bundle is the perfect home DIY brake controller kit for anyone wanting to install the most innovative and industry recognised trailer brake controller into their vehicle.
\n
FAQ:
\n
Which vehicles suit the universal kit
\n
It is suitable for vehicles where the start battery, Tow-Pro main unit and the cable run to the cabin are all in line. For installations that have the start battery on the other side of the vehicle, try the extended wiring kit option.
\n
It is compatible with Ford Ranger and Everest models
\n
Post 2018 (MY19) Ford released Autonomous Emergency Braking (AEB) Technology that features sophisticated trailer module technology that dictates when installing any aftermarket brake controllers*, due to the vehicle trailer detection system being extremely sensitive, deems it a requirement to use the correct wiring harnessfor these applications.
\n
The harness in this kit is more than just a standard wiring installation. The wiring kit consists of a harness plus a Signal Conditioning Module which safely filters the brake signal from the brake light circuit sourced from the trailer socket which is controlled from the vehicle’s trailer module.
\n
This harness is also backward compatible to Ford vehicles released prior to 2018.
\n
Vehicles where start battery is located on opposite side
\n
\n
The DIY Tow-Pro Elite Installation kit with extended wiring is suitable for vehicles where the start battery is on the other side of the vehicle from the rest of the installation.
Get yourself set up with the award-winning Redarc Tow-Pro Elite!
\n
Easily swap between automatic mode for highway driving or user controlled for off-road driving. The new user interface features a new control knob and better gain level visibility along with a simpler installation process.
\n
All this is tied up in a nice bundle for you!
\n
Features
\n
\n
Plug and play connectivity
\n
Includes all hardware for Tow-Pro Elite installation
\n
Active calibration
\n
AL-KO ESC and Dexter DSC compliant
\n
Smooth trailer braking response
\n
Automatic and user-controlled modes
\n
Electric/hydraulic operation
\n
Meets ADR21 safety standards
\n
Suitable for all vehicles
\n
Smaller remote installation depth, width and height
\n
Single drill installation
\n
Better gain level visibility
\n
Automotive grade connectors
\n
\n
\n
This includes:
\n
- A Tow-Pro Elite 12V (EBRH-ACCV3) electric trailer brake controller, featuring both user-controlled and proportional braking modes
\n
- Wiring Kit to suit your vehicle required for self-installation
\n
- A Tow-Pro Elite switch insert to allow the remote head to be installed into an existing switch panel in a vehicle dashboard
\n
This product bundle is the perfect home DIY brake controller kit for anyone wanting to install the most innovative and industry recognised trailer brake controller into their vehicle.
\n
FAQ:
\n
Which vehicles suit the universal kit
\n
It is suitable for vehicles where the start battery, Tow-Pro main unit and the cable run to the cabin are all in line. For installations that have the start battery on the other side of the vehicle, try the extended wiring kit option.
\n
It is compatible with Ford Ranger and Everest models
\n
Post 2018 (MY19) Ford released Autonomous Emergency Braking (AEB) Technology that features sophisticated trailer module technology that dictates when installing any aftermarket brake controllers*, due to the vehicle trailer detection system being extremely sensitive, deems it a requirement to use the correct wiring harnessfor these applications.
\n
The harness in this kit is more than just a standard wiring installation. The wiring kit consists of a harness plus a Signal Conditioning Module which safely filters the brake signal from the brake light circuit sourced from the trailer socket which is controlled from the vehicle’s trailer module.
\n
This harness is also backward compatible to Ford vehicles released prior to 2018.
\n
Vehicles where start battery is located on opposite side
\n
\n
The DIY Tow-Pro Elite Installation kit with extended wiring is suitable for vehicles where the start battery is on the other side of the vehicle from the rest of the installation.
\n
"},{"id":6866973163562,"title":"Redarc WIRING KIT TO SUIT RANGER AND EVEREST","handle":"redarc-wiring-kit-to-suit-ranger-and-everest","description":"
The REDARC TPWKIT-012 Tow-Pro Wiring Kit supports the installation of both the Tow-Pro Elite and Tow-Pro Classic electric brake controllers and is directly compatible with all the current model Ford Ranger and Ford Everest, with or without AEB.
\n
\nThe Tow-Pro Elite 12V is not compatible with Ford Ranger and Everest models.
","published_at":"2022-08-10T13:52:18+10:00","created_at":"2022-08-10T08:34:19+10:00","vendor":"Redarc","type":"Electric Brake Controller","tags":["Ford Ranger - PX","nambour2024"],"price":33900,"price_min":33900,"price_max":33900,"available":true,"price_varies":false,"compare_at_price":35500,"compare_at_price_min":35500,"compare_at_price_max":35500,"compare_at_price_varies":false,"variants":[{"id":40341108752426,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TPWKIT-012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Redarc WIRING KIT TO SUIT RANGER AND EVEREST","public_title":null,"options":["Default Title"],"price":33900,"weight":970,"compare_at_price":35500,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-redarc-wiring-kit-to-suit-ranger-and-everest-29698568126506.jpg?v=1660084676"],"featured_image":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-redarc-wiring-kit-to-suit-ranger-and-everest-29698568126506.jpg?v=1660084676","options":["Title"],"media":[{"alt":"Accelerate Off-Grid Touring Redarc WIRING KIT TO SUIT RANGER AND EVEREST","id":22123771002922,"position":1,"preview_image":{"aspect_ratio":1,"height":990,"width":990,"src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-redarc-wiring-kit-to-suit-ranger-and-everest-29698568126506.jpg?v=1660084676"},"aspect_ratio":1,"height":990,"media_type":"image","src":"//accelerateoffgrid.com.au/cdn/shop/products/accelerate-off-grid-touring-redarc-wiring-kit-to-suit-ranger-and-everest-29698568126506.jpg?v=1660084676","width":990}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"
The REDARC TPWKIT-012 Tow-Pro Wiring Kit supports the installation of both the Tow-Pro Elite and Tow-Pro Classic electric brake controllers and is directly compatible with all the current model Ford Ranger and Ford Everest, with or without AEB.
\n
\nThe Tow-Pro Elite 12V is not compatible with Ford Ranger and Everest models.
![\"\"](\"https://cdn.shopify.com/s/files/1/0385/4565/files/Easy_Returns_285.png?v=1617244230\")
![\"\"](\"https://cdn.shopify.com/s/files/1/0385/4565/files/4wd_specalists_icon_e63eddc1-7e5b-4a05-b045-5180813fad45.png?v=1617243876\"){kind=icon}
![\"\"](\"https://cdn.shopify.com/s/files/1/0385/4565/files/100_guaranteed_285.png?v=1617244229\")
![\"\"](\"https://cdn.shopify.com/s/files/1/0385/4565/files/Secure_285.png?v=1617244229\")
