Ford NextGen Ranger Space Saving Behind Seat DIY Dual Battery Kit
VIDEO We have engineered a complete dual battery system that can fit behind the rear seat of your Ford NextGen Ranger
Installation utilising OE mounting points, this DIY kit has been tested on the following vehicles :
- MY23.5 suits: XL, XLT, Sport, Wildtrak, Wildtrak X, Platinum & Raptor Ford Ranger NextGen
This is the ultimate solution for Utes and Dual Cab vehicles that can’t fit a battery under the bonnet or those who don't want a battery box taking up valuable tray space.
Cangoee 110Ah Lithium Battery
In-Built 20amp DC2DC Charger
Victron Energy Smartshunt 500A/50mV
Victron Energy Smart Solar Controller 75/15
6 Way Fuse Box
Vehicle Input Harness
Outputs Behind Seat
Grey Anderson Plug
12v Power Socket/Cig Socket
Input Behind Seat
Red Anderson Plug for Solar Input
PLUS Sockets in the rear
Simultaneous charging – DC/DC and solar Battery
Cangoee Lithium Battery 12V 110Ah Short Power Bank
110Ah robust M6 prismatic lithium cells. Internal BMS protection manages both over current and low voltage disconnect
5 Year Warranty
Internal 100A BMS
Rapid 100A charge rate
Discharge Current: 100A max cont. 200A surge
Twice the capacity of AGM / SLA batteries 50% lighter than other systems
Slim form factor in multiple configurations designed for parallel connection.
Inverter suitable power supply stud
300A rated battery connectors
Size L: 670mm. H: 264mm. D: 50mm
Life at 80% DOD: 2000 cycles
Life at 50% DOD: 5000 cycles
Operating Temp: 0-45degrees
We've custom made a laser cut aluminium plate to replace the existing plastic one in the tub, powder coated.
Dual USB Socket
12V Power Socket
Grey Anderson for output
Red Anderson for Solar Input
The plate has a provision that just pops out if your vehicle is optioned with the roller cover.
Includes Wiring Harness to sockets in the rear.
If your NextGen Ranger is optioned with a SubWoofer behind the rear seat. We've custom made a plate and created instructions so you can relocate it to under the drivers side rear seat.
PLEASE NOTE: You will need to remove your jack to fit this kit - we do not have a new jack mounting point. The jack will physically fit behind the seat with the kit - just no mounting point.
Need this item installed?
Book your install with our team today by either:
Filling out a booking request on our Contact Page
Or give us a call on
(07) 5479 6652 IMPORTANT SHIPPING INFORMATION
Please note your battery & the rest of your kit may arrive via different freight companies at different times.
Postage Time Frames:
As each kit is custom built it may take us some time to process and dispatch your order.
Please allow 2 weeks for estimated dispatch time. Shipping can take 1-2 weeks depending on your location and postal service.
This kit is classified as dangerous goods, because of this it is common for it to be held for 3-4 days on average for inspection during the shipping process. If your kit still hasn't arrived after 2 weeks from shipment date on tracking, please don’t hesitate to contact us
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.