Call Us
(07) 5479 6652
Y62 Patrol Lithium Dual Battery DIY Kit For Under Rear Floor
🚨🚨NEW MODEL🚨🚨 - Same great features - but retain the Jack Mount
This is the ultimate Dual Battery Setup for your Nissan Y62 Patrol. We've fitted lots of other options that are available on the market but none of them had a positive high current output to allow you to run an Inverter from it and power all your 240v gadgets PLUS such an easy DIY installation.
When we came across this wicked 110amp hour Lithium Battery with inbuilt
- 20amp DCDC Charger
- Victron SmartSolar MPPT 75/15 Solar Regulator
- Victron Smart Shunt 500A
- Victron Battery Protect 12/24V 65Amp
We knew this would be the ultimate Dual Battery Solution for a Y62 Nissan Patrol.
Dimension of battery: L1060mm x W268mm x D61mm
We have completed plenty of the installations now and perfected a wiring harness that is an absolute piece of art.
The battery is by Cangoee and comes with a 5year warranty.
See the full spec sheet here.
Socket Bank
The final piece of the puzzle was a socket bank to power all your devices. We didn't want to send out a kit telling you to drill into your side panels, so we've created a custom housing made of Powder Coated Steel that sits in your cup holder (a couple of small holes are required in the cup holder) with the following outputs
- 2 x 12V Power Socket
- 1 x Dual USB Socket
- 1 x Engel Socket
- 1 x Grey 50A Anderson Plug for output
- 1 x Red 50A Anderson Plug for Solar Input
Wiring Harness
Measure twice and cut once - this wiring harness has been perfected in our workshop on numerous Y62 Patrol's to ensure it will slot into your Y62 like a glove. No expense has been spared, we have used all the best gear to produce a premium harness.
- Austech Cable
- High Grade Battery Lugs to fit onto your start battery
- OEX Midi Fuse Holder & 60Amp Midi Fuse
- Ignition picked up via a piggyback Fuse Holder
- Run in TechFlex Braided Sleeving
- Adhesive Lined Heat Shrink used at all junctions
- Genuine Anderson Plugs for connection to DC Input
- Lugs & Genuine Anderson Plugs run in TechFlex to our Custom Socket Bank
Instructions
We have created a step by step instruction manual with photos so you can DIY this kit like a pro.
Add an Inverter & Inverter Wiring Kit
If you want to charge your laptop or power-tools or make a coffee then an awesome addition to run all those 240volt gadgets is an Inverter. The Inverter converts the 12volt power stored in the battery to 240volt so you can plug them in. Each Inverter will come with a wiring kit.
OPTION 1: Redarc 1000w 12V Pure Sine Wave Inverter
- Australian Made - 2 year warranty
- Input (Operating) Voltage: 10.5 - 16.5VDC
- Output System Voltage: 240V AC
- Output Power: 1000W
- Connection: AU/NZ Power Socket
- Length (mm): 372
- Width (mm): 280
- Height (mm): 83
OPTION 2: Enerdrive ePower 1000w 12V Pure Sine Wave Inverter
- 2 year Warranty
- DC Input Voltage Operating Range: 10.5 - 15.5VDC
- Output System Voltage: 240V AC
- OutPut Power: 1000W
- Connection: AU/NZ Power Socket
- Length (mm): 325
- Width (mm): 177
- Height (mm): 90
Socket Bank
The final piece of the puzzle was a socket bank to power all your devices. We didn't want to send out a kit telling you to drill into your side panels, so we've created a custom housing made of Powder Coated Steel that sits in your cup holder (a couple of small holes are required in the cup holder) with the following outputs
2 x 12V Power Socket (Cigarette Socket1 x Dual USB Socket1 x Engel Socket1 x Grey 50A Anderson Plug for output1 x Red 50A Anderson Plug for Solar Input
Wiring Harness
Measure twice and cut once - this wiring harness has been perfected in our workshop on numerous Y62 Patrol's to ensure it will slot into your Y62 like a glove. No expense has been spared, we have used all the best gear to produce a premium harness.
Austech CableHigh Grade Battery Lugs to fit onto your start batteryOEX Midi Fuse Holder & 60Amp Midi FuseIgnition picked up via a piggyback Fuse HolderRun in TechFlex Braided SleevingAdhesive Lined Heat Shrink used at all junctionsGenuine Anderson Plugs for connection to DC InputLugs & Genuine Anderson Plugs run in TechFlex to our Custom Socket Bank
Add an Inverter & Inverter Wiring Kit
If you want to charge your laptop or power-tools or make a coffee then an awesome addition to run all those 240volt gadgets is an Inverter. The Inverter converts the 12volt power stored in the battery to 240volt so you can plug them in. Each Inverter will come with a wiring kit.
OPTION 1: Redarc 1000w 12V Pure Sine Wave Inverter
Australian Made - 2 year warrantyInput (Operating) Voltage: 10.5 - 16.5VDCOutput System Voltage: 240V ACOutput Power: 1000WConnection: AU/NZ Power SocketLength (mm): 372Width (mm): 280Height (mm): 83
OPTION 2: Enerdrive ePower 1000w 12V Pure Sine Wave Inverter
2 year WarrantyDC Input Voltage Operating Range: 10.5 - 15.5VDCOutput System Voltage: 240V ACOutPut Power: 1000WConnection: AU/NZ Power SocketLength (mm): 325Width (mm): 177Height (mm): 90
INSTALL ENQUIRY
Need this item installed?
Book your install with our team today by either:
Filling out a booking request on our Contact Page
Or give us a call on (07) 5479 6652
IMPORTANT SHIPPING INFORMATION
Postage Time Frames:
As each kit is custom built it may take us some time to process and dispatch your order.
Please allow 2 weeks for estimated dispatch time. Shipping can take 1-2 weeks depending on your location and postal service.
This kit is classified as dangerous goods, because of this it is common for it to be held for 3-4 days on average for inspection during the shipping process. If your kit still hasn't arrived after 2 weeks from shipment date on tracking, please don’t hesitate to contact us.
If you need your kit within a particular deadline, please contact us prior to ordering so we can ensure your items can arrive on time.